New Product Release: IAG I-Line Mud Flaps

[PC Austin]

any update on fitment with the RSE step sliders?

i've got a set on the way and live just down 97 from the shop!

What a coincidence, just installed them today. Works perfectly fine. No issues. You can see there's a gap between the steps and the mud flaps.

Sponsored

 

[TheTexorcist]

Just curious did anyone do anything with the length of the screws on the rear flaps or just leave them like they came? Pic is the rear ones I installed.

 

[Longshot]

Just curious did anyone do anything with the length of the screws on the rear flaps or just leave them like they came? Pic is the rear ones I installed.

I used a hacksaw and trimmed mine down so it looked a bit better. I kinda wish the bolts were black to match the flaps on the back side. I'm thinking I'll probably touch up paint the heads with some black paint at some point.

 

[Callelk]

I have access to Black Stainless at work, what size are the machine screws? M6X?

 

[IAG Off-Road]

I have access to Black Stainless at work, what size are the machine screws? M6X?

They are M6x1.00x25

 

[Callelk]

They are M6x1.00x25

Ah, thank you....

 

[vxEric]

Just installed fronts on my '24 yesterday. They look great but the brackets held the mudflaps at a really steep angle on both sides. The inner push pin ended up a solid 1.5 inches away from the liner.

I just clamped them into a vise and bent the part with threaded holes away around 10-15 degrees and now they fit great.

Not sure if something changed on the '24

 

[IAG Off-Road]

Just installed fronts on my '24 yesterday. They look great but the brackets held the mudflaps at a really steep angle on both sides. The inner push pin ended up a solid 1.5 inches away from the liner.

I just clamped them into a vise and bent the part with threaded holes away around 10-15 degrees and now they fit great.

Not sure if something changed on the '24

Hmmm..... What trim level is your truck?

 

[Bobio]

Just installed fronts on my '24 yesterday. They look great but the brackets held the mudflaps at a really steep angle on both sides. The inner push pin ended up a solid 1.5 inches away from the liner.

I just clamped them into a vise and bent the part with threaded holes away around 10-15 degrees and now they fit great.

Not sure if something changed on the '24

Somthing did change especially the right rear. I had to drill new hole and bend a little to get it to fit even with the back left.

 

[Bobio]

Somthing did change especially the right rear. I had to drill new hole and bend a little to get it to fit even with the back left.

2024 badlands sas

 

[vxEric]

2024 badlands sas

Same for me. Haven't tried the rears yet.

 

[IAG Off-Road]

Same for me. Haven't tried the rears yet.

Shoot us a PM with some pictures when you get to the rear if you don't mind.

 

[vxEric]

I had no issues with the rears on my '24 Badlands SAS 2 Door. Fit great. Just got everything mocked up, left loose, then tightened it all down once it was lined up. Took about 40 minutes start to finish.

Sponsored