Need Bumper Bolt Part #

[BroncoDave24]

A while back I put on a set of Weathertech rear mudflaps on my 2024 Wildtrak. I noticed today that the factory bolt that you have to remove and re-use on the passenger side is missing.

I am hopeful that @Ducati1098 can get me the correct part #. I have attached a photo.

All remaining bolts will be removed and Loctite applied before returning to service

Thanks in Advance!

Sponsored

 

[Ducati1098]

It 100% sure what I’m looking at in the picture. Here is the rear bumper diagram, do you see which bolt you need?

 

[BroncoDave24]

I think it is HB3. I attached the pic from the install sheet. It shows a little more detail than my pics did. The bolt I need is at the top. They say the bolt at the bottom wasn't used in my model.

 

[Ducati1098]

It’s hard to tell if that’s the same bracket. I think it is, but the bolts your looking for go here:

I can’t find those though. HB3 is W505442-S439

 

[BroncoDave24]

Thanks, I will give it a try.

 

[BroncoDave24]

@Ducati1098 DO you have access to the specs of that bolt? They are on national back-order with no ETA. I need to find a generic replacement. Thanks for all you do for us on this forum!

 

[Ducati1098]

@Ducati1098 DO you have access to the specs of that bolt? They are on national back-order with no ETA. I need to find a generic replacement. Thanks for all you do for us on this forum!

Catalog only says M10, but I took one of mine out really fast and it's M10x1.50 and roughly 25mm long

 

[BroncoDave24]

Thanks!

Sponsored