- Thread starter
- #1
Hi guys,
I've had these 21 Offroad lights for a while and they have been awesome until recently. About 10 days ago after some heavy rain, the white lights stopped working. The ambers are perfect.
I contacted the reseller and was asked to check the fuses and connectors. I replaced the fuses and checked all the connections/wires, and all seemed fine. I then removed the lights completely, unplugged all the connectors, let them air out for a few days, then I cleaned them, applied Ancor Dielectric Silicone Compound to the connector pins, wrapped everything with electrical tape, and reinstalled them.
This is what they look like now
But amber lights work perfectly.
I want the white lights to work as they did/should. Any suggestions or advice would be truly appreciated.
Thanks
I've had these 21 Offroad lights for a while and they have been awesome until recently. About 10 days ago after some heavy rain, the white lights stopped working. The ambers are perfect.
I contacted the reseller and was asked to check the fuses and connectors. I replaced the fuses and checked all the connections/wires, and all seemed fine. I then removed the lights completely, unplugged all the connectors, let them air out for a few days, then I cleaned them, applied Ancor Dielectric Silicone Compound to the connector pins, wrapped everything with electrical tape, and reinstalled them.
This is what they look like now
But amber lights work perfectly.
I want the white lights to work as they did/should. Any suggestions or advice would be truly appreciated.
Thanks
Sponsored