- Thread starter
- #1
I have a 2023 Base Sasquatch with 2.3L automatic with 55k miles
Recently I noticed intermittent engine rattle during acceleration and under load, like going up a small incline. It occurs about 10 minutes into the drive. Not when the engine is cold but when the engine oil is at around 187-189 degrees Fahrenheit.
The rattle sounds like there is a hole in the down pipe, almost like a Dodge Hellcat. The gas pedal will also have a slight vibration. The noise and the vibration disappear after a few minutes. It happens at almost every drive.
The dealership mechanic had the car for a few days and said it drives normal. He did not say if they replicated the problem or not. Research from online and this forum suggest it could be loose turbo wastegate, spark knocks or normal 2.3L behavior. Strangely, most of the people experiencing rattle are at cold start. Mine comes on after 10 minutes of start.
Anyone else have this issue or know of a fix?
One thing to add is that I had a leak in the timing cover a few months ago and the dealership replaced the seal. Anything they did there could have caused issues?
Recently I noticed intermittent engine rattle during acceleration and under load, like going up a small incline. It occurs about 10 minutes into the drive. Not when the engine is cold but when the engine oil is at around 187-189 degrees Fahrenheit.
The rattle sounds like there is a hole in the down pipe, almost like a Dodge Hellcat. The gas pedal will also have a slight vibration. The noise and the vibration disappear after a few minutes. It happens at almost every drive.
The dealership mechanic had the car for a few days and said it drives normal. He did not say if they replicated the problem or not. Research from online and this forum suggest it could be loose turbo wastegate, spark knocks or normal 2.3L behavior. Strangely, most of the people experiencing rattle are at cold start. Mine comes on after 10 minutes of start.
Anyone else have this issue or know of a fix?
One thing to add is that I had a leak in the timing cover a few months ago and the dealership replaced the seal. Anything they did there could have caused issues?
Sponsored