Dash custom speaker plates?

[eduard4us]

Any recommendations for places that could customize speaker plates for the dash locations?

Sponsored

 

[jayr1959]

I used these from Crutchfield to mount tweeters.

https://www.crutchfield.com/p_120825609/Metra-82-5609-Tweeter-Mounting-Brackets.html

 

[eduard4us]

Thanks Jay, I know about the Metra but I need something custom to mount a 4inch midrange.

 

[Alassise]

Here you go.
https://www.mtiacoustics.net/ford.h...Speaker-Panels/p/503984168/category=154083001

Sounds Good Stereo use to make something similar, but pricier (not that the MTI one is cheap). But for a custom install, I think their offering looks professional and well constructed.

 

[eduard4us]

Here you go.
https://www.mtiacoustics.net/ford.h...Speaker-Panels/p/503984168/category=154083001

Sounds Good Stereo use to make something similar, but pricier (not that the MTI one is cheap). But for a custom install, I think their offering looks professional and well constructed.

Thanks a lot!

I do have a set from SGS for my current full range BLAMs, they do look very nice and professional. I emailed them to see if they would do something custom for a 4 inch speaker.

I’ll reach out to Jim at MTI on Monday and see if the could do something custom as well.

 

[brtd]

This guy: https://www.themeshman.net/

Details in my stereo build. He was able to get pretty creative to help me fit my tweet/mid pairs.

 

[gringoloco]

Are you trying to mount under the factory grilles? I tried a few off-the-shelf adapters before I ended up 3D printing these for a set of Audiofrog GS42s:

 

[eduard4us]

This guy: https://www.themeshman.net/

Details in my stereo build. He was able to get pretty creative to help me fit my tweet/mid pairs.

Thanks a lot, I remember your build
I’ll ping him on Monday

Are you trying to mount under the factory grilles? I tried a few off-the-shelf adapters before I ended up 3D printing these for a set of Audiofrog GS42s:

Yes!! That is an awesome solution. I have a set of Morel 4” that I want to install them as mids in a 3-way system. What do I need to do for a set

 

[gringoloco]

Yes!! That is an awesome solution. I have a set of Morel 4” that I want to install them as mids in a 3-way system. What do I need to do for a set

What model of 4” speaker are you using? I can probably draw something up real quick that will work. What’s your plan for the tweeter?

 

[eduard4us]

What model of 4” speaker are you using? I can probably draw something up real quick that will work. What’s your plan for the tweeter?

Would really appreciate it, please no rush.
I’m still evaluating my options for plates.

The driver going in will be a mid-range Morel MSW 424D, this is the sketch for the driver.

https://www.morelhifi.com/wp-content/uploads/2020/12/MSW424D-unit-size-1000X400-tiny.jpg

The tweeters are going in separate pods.

 

[gringoloco]

Would really appreciate it, please no rush.
I’m still evaluating my options for plates.

The driver going in will be a mid-range Morel MSW 424D, this is the sketch for the driver.

https://www.morelhifi.com/wp-content/uploads/2020/12/MSW424D-unit-size-1000X400-tiny.jpg

The tweeters are going in separate pods.

Sent you PM.

 

[mandark]

Sent you PM.

Interested too

 

[Johnny Mo]

Are you trying to mount under the factory grilles? I tried a few off-the-shelf adapters before I ended up 3D printing these for a set of Audiofrog GS42s:

Those Audiofrogs sounded so good during my comparo - even my son picked them as the best sounding of the bunch we listened to. Just couldn't justify that they were 2x $$ better sounding than the Infinity 407s.

 

[Sluggz]

Are you trying to mount under the factory grilles? I tried a few off-the-shelf adapters before I ended up 3D printing these for a set of Audiofrog GS42s:

Do you have the stl file by chance?

Sponsored