AIR Design Fenders Flares with width measurements

[bstottlemyer85]

I installed a set of Air Design Fender Flares on my 2021 Badland

Icon Rebound Pro = 17x8.50 | 0mm Offset
Nitto Ridge Grappler = 35x12.50R17LT E 121Q

Air Design Fender Measure:

Non Sas Fender Measure

Sas Fender Measure:

The Standard Fender Flare Before for Reference:

Sponsored

 

[LoneWolf1903]

I installed a set of Air Design Fender Flares on my 2021 Badland

I have Icon Pro Rebound wheels with a offset of 0

Are the bottom photos with the standard flares?

 

[bstottlemyer85]

Are the bottom photos with the standard flares?

Yes they are

 

[alexg823]

These look pretty good! Also seems like no poke even with 0 offset? I guess that also means they’re wider than sas fender flares too? Can’t remember the measurements on those.

 

[bstottlemyer85]

These look pretty good! Also seems like no poke even with 0 offset? I guess that also means they’re wider than sas fender flares too? Can’t remember the measurements on those.

The third image with the measure tape (from the top) is with the sas fender flares. I tried to label them, but looks like it didn’t work

*Edited, I just figured it out and updated

 

[alexg823]

The third image with the measure tape (from the top) is with the sas fender flares. I tried to label them, but looks like it didn’t work

nvm, i see the labels! Looks like these are a little over 1.25 inch wider than sas flares. Looks like they're basically made for 0 offset! Thanks!

 

[88to21bronco]

I assume you're running 35x12.5?

 

[Slyder]

I've been looking at these for a while now, even though I don't have a Bronco yet, and waiting for someone to do this.

So many of the Aftermarket wheels offered are at a +0 offset and these are just enough wider than factory Sasquatch flares to offset some of the additional poke they have.

 

[WuNgUn]

I installed a set of Air Design Fender Flares on my 2021 Badland

I have Icon Pro Rebound wheels with a offset of 0

Air Design Fender Measure:

Non Sas Fender Measure

Sas Fender Measure:

The Standard Fender Flare Before for Reference:

... And STILL needs mudflaps

 

[bstottlemyer85]

I assume you're running 35x12.5?

You are correct

Icon Rebound Pro = 17x8.50 | 0mm
Nitto Ridge Grappler = 35x12.50R17LT E 121Q

 

[Mean Red GT]

You are correct

Icon Rebound Pro = 17x8.50 | 0mm
Nitto Ridge Grappler = 35x12.50R17LT E 121Q

Nice looking rig thanks very much for sharing! I am going to have nearly the exact same wheel/tire specs and was wondering what to do about the "poke". Where did you get the flares? Also curious how much of a lift you have?

 

[bstottlemyer85]

Nice looking rig thanks very much for sharing! I am going to have nearly the exact same wheel/tire specs and was wondering what to do about the "poke". Where did you get the flares? Also curious how much of a lift you have?

Got them through my dealer:

https://accessories.ford.com/products/fender-flares-by-air-design-for-4-door

 

[Slyder]

Nice looking rig thanks very much for sharing! I am going to have nearly the exact same wheel/tire specs and was wondering what to do about the "poke". Where did you get the flares? Also curious how much of a lift you have?

Ford accessories has them and places like Stage 3 Motorsports carries them also.

I think Stage 3 has them for about $100 cheaper than Ford.

 

[88to21bronco]

You are correct

Icon Rebound Pro = 17x8.50 | 0mm
Nitto Ridge Grappler = 35x12.50R17LT E 121Q

It's hard to tell from the pics...how well do they match the other plastic trim pieces, ie, bumper etc...?

And edit...one more question lol: How loud are those Nittos?

 

[bstottlemyer85]

It's hard to tell from the pics...how well do they match the other plastic trim pieces, ie, bumper etc...?

And edit...one more question lol: How loud are those Nittos?

Here is an image of the front area, I will grab one from the back later today. It hangs out, but I never paid attention to it.

The Nittos run great to me. Haven’t Had a set before, not loud in my opinion. With the soft top there are a lot more noises I hear other then the tires.

Sponsored