ADV Production Modular Hardtop!

[evgenyvasenev]

This has been a bolt together design since day one. As for assembly, it takes us about 45-60 minutes. The parts self clock and locate, it is as easy as it gets. One huge reason is to keep the shipping costs lower, the bolt together design allows it to ship flat. Second reason to have our customers assembly is that way they know every detail about their top, if they need to adjust rubber, tighten j-clamps, turn handles, etc then they know exactly what to do. Third reason is because our customers can store the hardtop flat if disassembled (It takes up a lot less space when disassembled). There are more reasons but those are three important ones.

I mean those sticky things only, not the whole top. Probably it will not that bad, just asking

Sponsored

 

[Lak34ers]

I mean those sticky things only, not the whole top. Probably it will not that bad, just asking

7k+ and you build it like IKEA....like overpaying at the grocery store and you have to bag it.

 

[CTwaterfowler]

all I can say is I cant wait till my friend aka "10 thumbs " gets his. His wife bought me a very nice cyberorange bronco hat as a thankyou for helping them go through the order banks.

WOW this top might be worth a new fishing jacket for technical help.

 

[Elonmsk]

Just a recap of @ADV Fiberglass . You didn’t provide any of the updates promised in November.

You are saying “May” for delivery. Customers are 100% getting scammed at this point.

@ADV Fiberglass used the original prototype and decided to create an install video to buy more time. Where is hardtop v1 vs. v2 comparison? This is a SCAM.

 

[ADV Fiberglass]

Just a recap of @ADV Fiberglass . You didn’t provide any of the updates promised in November.

You are saying “May” for delivery. Customers are 100% getting scammed at this point.

@ADV Fiberglass used the original prototype and decided to create an install video to buy more time. Where is hardtop v1 vs. v2 comparison? This is a SCAM.

Unfortunately our manufacturing teams timelines were pushed back more than we wanted (from what we stated back in November). We are doing everything in our power to move things along quicker. This is a production top used in the video. Feel free to come visit our shop and see the production units in person as well!

 

[3175375]

I received an email today that indicates the top is in production.

no etas, but this is the most detailed communication to date. Smoke and mirrors? It’s all up to Advanced Fiberglass….

 

[Sunday Money]

Perhaps ADV should have waited till they actually could ship product before they started selling them. At least clients would be happy. If and when you get a top what are ya''ll going to do when you need warranty work?
Good luck with that.

Warranty work? Although there have been many reported leakage issues with the OEM hardtop sections and 1-piece cap, this DIY bolt assembled version should be fine. Plus you can take this one apart for reduced storage.

 

[CTwaterfowler]

adv question
when the soft top is removed, prior to putting the adv hard top on,
does the plastic pillar caps on both sides have to be unbolted (3 bolts) each side and removed and then the 3 bolts put back in place. the hard top would then slip in.
I ask this because the TOR install shows that this must be done.
or am I mixing apples and oranges

top looks good. I will be taking it slooooooow

 

[Dadsquatch]

The fact that you have to completely build every nut and bolt of this hard top, including building the latches yourself, is unacceptable for $7,000. Aren’t there dozens of entry points for water this way? I get there are rubber gaskets, but still. Not a solid top. If it leaks, they are just going to blame you since you have to put it together.

 

[Sunday Money]

The fact that you have to completely build every nut and bolt of this hard top, including building the latches yourself, is unacceptable for $7,000. Aren’t there dozens of entry points for water this way? I get there are rubber gaskets, but still. Not a solid top. If it leaks, they are just going to blame you since you have to put it together.

But it can be disassembled for easier storage.

 

[MNBigfoot]

The fact that you have to completely build every nut and bolt of this hard top, including building the latches yourself, is unacceptable for $7,000. Aren’t there dozens of entry points for water this way? I get there are rubber gaskets, but still. Not a solid top. If it leaks, they are just going to blame you since you have to put it together.

Oh, the things we must do to get the Assembled in America sticker.

 

[Beach_Bum]

Warranty work? Although there have been many reported leakage issues with the OEM hardtop sections and 1-piece cap, this DIY bolt assembled version should be fine. Plus you can take this one apart for reduced storage.

The fact that you have to completely build every nut and bolt of this hard top, including building the latches yourself, is unacceptable for $7,000. Aren’t there dozens of entry points for water this way? I get there are rubber gaskets, but still. Not a solid top. If it leaks, they are just going to blame you since you have to put it together.

They have already communicated:

Second reason to have our customers assembly is that way they know every detail about their top, if they need to adjust rubber, tighten j-clamps, turn handles, etc then they know exactly what to do.

People really shouldn't be surprised that it will be the customer's fault and they will be responsible to figure out any issues.

 

[redone17]

 

[3175375]

So I now have 2 data points. Ordered on 7/19/22 and as of 2/16/24 - in production.
Like I said, it is all now out there for Advanced Fiberglass Concepts to deliver…

 

[R3LYK_]

So I now have 2 data points. Ordered on 7/19/22 and as of 2/16/24 - in production.
Like I said, it is all now out there for Advanced Fiberglass Concepts to deliver…

Ordered: 3/1/2022
"In production": 2/16/2024

As much as my patience is running thin, I feel like I'm too far into the process to cancel and start over with another company.

Sponsored