Sponsored

Adding a wireless entry Keypad without factory remote start

Bronco Master

Well-Known Member
First Name
Luke
Joined
Mar 30, 2023
Threads
7
Messages
104
Reaction score
118
Location
Palm Coast FL
Vehicle(s)
2022 Jeep Wagoneer III, 2017 Ford Superduty F-250 STX
Your Bronco Model
Undecided
Clubs
 
Hello! so I recently redeemed my FordPass Points For a wireless entry keypad for Vehicles without factory remote start (Which my base does not have remote start). I have scoured the internet for HOURS with no info on this. I'm thinking about taking to ford dealer but I'd rather do it myself without a cost.
Ford Bronco Adding a wireless entry Keypad without factory remote start Screenshot 2023-09-27 at 10.37.43 AM

Any ideas?
Sponsored

 

RagnarKon

Badlands
Well-Known Member
First Name
Bryan
Joined
Aug 5, 2021
Threads
41
Messages
5,452
Reaction score
14,493
Location
New England
Vehicle(s)
Ford Bronco, Escape, Focus
Your Bronco Model
Badlands
Clubs
 
It is possible to install it yourself; you need a J2534 adapter, Windows laptop, and a FDRS (Ford Diagnostic and Repair System) license.

FDRS is the same software Ford dealers use, and it is $50 for a 2-day license. A J2534 adapter that isn't complete garbage costs around $600. There is cheaper J2534 adapters that cost around $120 - $150... but they can be very iffy when it comes to actually functioning properly with FDRS, and I have bricked a few modules before while programming with the cheaper adapters. So up to you if you want to take that risk.

Unfortunately the combined cost of the cheaper J2534 adapters, plus the FDRS license will run you close the $200 mark, and that's roughly what a dealership will (or should) charge you. So ultimately you won't really be saving a ton of money in the end.
 
OP
OP
Bronco Master

Bronco Master

Well-Known Member
First Name
Luke
Joined
Mar 30, 2023
Threads
7
Messages
104
Reaction score
118
Location
Palm Coast FL
Vehicle(s)
2022 Jeep Wagoneer III, 2017 Ford Superduty F-250 STX
Your Bronco Model
Undecided
Clubs
 
It is possible to install it yourself; you need a J2534 adapter, Windows laptop, and a FDRS (Ford Diagnostic and Repair System) license.

FDRS is the same software Ford dealers use, and it is $50 for a 2-day license. A J2534 adapter that isn't complete garbage costs around $600. There is cheaper J2534 adapters that cost around $120 - $150... but they can be very iffy when it comes to actually functioning properly with FDRS, and I have bricked a few modules before while programming with the cheaper adapters. So up to you if you want to take that risk.

Unfortunately the combined cost of the cheaper J2534 adapters, plus the FDRS license will run you close the $200 mark, and that's roughly what a dealership will (or should) charge you. So ultimately you won't really be saving a ton of money in the end.


😳 I think ill do the dealer

Thanks btw
Sponsored

 
 





Top