Search results

I put this deflector on and like many have said it does keep bottom 60% of windshield cleaner from bugs but the wind noise created by it was more than I wanted to hear. Makes it sound like driving into 60 mph winds at only 35-40mph. I replaced it with the AVS brand with no lip, of course this...

I’m still just wondering why you accepted delivery of vehicle if you’re finding all these things that you don’t like???

No problem, hope it helps.

Let me know if u need additional measuring points👍🏼

I installed Kicker component 6.5s in kick panels and was very disappointed in bass. I pulled speaker and lined entire kick panel enclosure with killmat and also used killmat to create seal around speaker mount. Sounded great but could hear some pfffftt escaping around the trim clip holes of door...

I had the same problem when I installed my Kickers, for me it was the thin 1/2” long plastic ring that is on inside of the kick panel grill. I just trimmed it down to fit, if I recall correctly it was only certain areas of it that was making contact on speaker mounting face, don’t think I had to...

After a lot of searching for mine it turned out to be the plastic vent grille on inside of tailgate. I removed it lined back contact surface with some felt tape. Also found a small plastic piece just inside that was rattling a bit and put a piece of felt tape on it too. Solved my problem

You could always have the areas that you’re most concerned with color match linex. Will cost a few bucks but you won’t have to worry about it for the life of your ride. I have painted flares and find myself touching up the front of rear flares more than I want to😬

I have OBX Non Sas and am running 275/65r18. Little wider a bit more aggressive tread and side lugs. Only slightly heavier, stock wheels no change in speedo

To make a person look tirelessy for that annoying whistle sound🤔

I had a similar issue with past vehicle. I first swapped fronts to rear to see if issue changed….it did…did force balance test and found one tire out of specs. Could be similar issue to slightly bent rim as it sounds consistent with both sets of tires.

It will probably cost around $5000 to get top prepped and painted properly!!!

How many miles and asking price?

It’s fairly common. The tanks are splitting at the plastic weld seam on bottom. Had to get mine replaced at 12000 miles

Could vent line be blocked or pinched??? Just spitballing here….

I have a 2.7 and I do notice a slight vibration difference when I have AC on, especially in steering wheel at idle. Not saying this is your issue, but I have confirmed it to be the case with mine.

If you’re talking about push pins to hold liner in, most parts stores carry a variety. If you’re talking about the rotational levers for attaching flare to fender:

I had a bad rattle, mine turned out to be the black plastic grill on interior tailgate. Removed and lined grill edge with felt tape, also there was a little plastic mechanism inside that was rattling too that I insulated with more felt tape. Totally disappeared after reinstalling the grill.

Hahaha, I just listened to it. Reminds me of the old educational films they would show in school.👍🏼

No tape required, poke the sharp tool through surface then stick wire in end of handle and push it out of the sharp end into interior.👍🏼