What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Nitwit]

Well mine is a base model sas. I just had the wiring for the mirror adjustment, nothing else. It was super easy and I'm pleased with them.

Great. Glad it worked for you!

Sponsored

 

[bbowisbald]

How did the mirrors turn out? I received mine and was given a refund for the supposed defect. I wanted to install them anyways and see how they were. I found the connector for the blindspot did not seem to work with what I have on my Bronco

I was wondering if this part was supposed to come out

Mine is a base model sasquatch so nothing fancy about the mirror functions. Just two wires for positioning. They work just like before.

 

[agentdarnell]

After the procal tune the other day, i had sport mode enqbled on my Badlands Sasquatch. It makes it a bit more spicy, especially with the tune. I might start researching to see if I can get close to 400hp with some mods.

 

[agentdarnell]

Oop other than installing sports mode, this westin brush guard arrived and I bought a badlands apex winch from harbor freight with a 2 year warranty.

 

[5GENIDN]

Oop other than installing sports mode, this westin brush guard arrived and I bought a badlands apex winch from harbor freight with a 2 year warranty.

How are you planning on mounting the winch?

 

[agentdarnell]

How are you planning on mounting the winch?

I just ordered the Rough Country high winch mount. The bottom bar of the brush guard is removable. Should look like this when done or close.

 

[Iceman62]

Fixed a narly ding the plastic hood scoop put in my view.

Note: If you get/own one of these, be careful. Even after stripping the hood clear of all surface protectants/dirt, installing the part, letting it sit overnight with weights/clamps it only took a week to fly off. Bounced off windshield (sideways) and dinged the hood.

 

[Kach Vartan]

Technically Sunday - hit some trails in the local Sierra Paloma mountains. Nice mix of forest, grasslands and desert.

 

[Fuzion2Bronco]

Had a meeting in the Parking

 

[CarmeloS]

Going to Autozone to get Refrigerant

Good news is atm its decent weather outside, bad news is I'm go to TN soon

 

[Administrator]

Love seeing all the Bronco action, keep em coming

 

[N8do]

Well, had the parts setting for a bit. I finally got to it! Installed the tailgate reinforcement from HR that matches the roof rack. It WILL take an extra hands to hold and line everything up. Tried solo....no go.

Next is the rotopax water can bracket and should be ready for another trip to the DBBB next week!!

Used some foam packing cut to fit to buffer between paint and bracket. Did NOT like the idea of surface contact like that.

Insuring alignment....had a bit of a bow to it.

Finished before dark! Hope this will assist if I do decide to go 37s later on.

Final touch.....hehehe

My Motley Bronco tool kit covered it all. Im liking this thing!

 

[BigMeatsBronco]

Installed a aluminum PPE transmission pan on the 10r80. It also fits the 10r60. Looks nice and has a drain plug too. Highly recommend.

 

[N8do]

Okay......I know what your thinking......who is this guy and why is he doing all this during the week. Well, I get summer's off! Ya, the benefits of dealing with everyone else's feral children for 10 months. Lol. So this is why Im sharing my summer therapy sessions.
Just received Amazonian gear and installed. Did some Etsy stalking as well. This is where I am today! Did all the mechanical and now, esthetics.

Had to modify due to misalignment from manufacturer. Drilled out the slot to lin up. Improvise adapt overcome.

Then some final touches for the day.
Goes well with the 24 Badlands trim.

Oh ya....and created a bracket to mount a set of trac boards on the roof rack.

 

[Charlie Mike]

Okay......I know what your thinking......who is this guy and why is he doing all this during the week. Well, I get summer's off! Ya, the benefits of dealing with everyone else's feral children for 10 months. Lol. So this is why Im sharing my summer therapy sessions.
Just received Amazonian gear and installed. Did some Etsy stalking as well. This is where I am today! Did all the mechanical and now, esthetics.

Had to modify due to misalignment from manufacturer. Drilled out the slot to lin up. Improvise adapt overcome.

Then some final touches for the day.
Goes well with the 24 Badlands trim.

Oh ya....and created a bracket to mount a set of trac boards on the roof rack.

I have the Turn Offroad tailgate reinforcement and Rotopax carrier sitting in the garage right now. I'm just waiting on the Turn Offroad chase light to come in before I start the install. It was purchased at the same time but had a 7 - 10 day shipping notice.

Sponsored