LensJet™ — Plug-and-Play Rear Camera Washer Kit for the 6th Gen Bronco

[VantageLab]

If you've ever backed off a muddy trail, into a snowy parking lot, or through the rain and had zero visibility through your rear camera — you know exactly why I built this.

The factory washer line is there for the rear windshield, It just doesn't reach the camera. The LensJet fixes that.


How it works

The LensJet taps into your factory rear washer line via a Y-splitter and adds a dedicated nozzle aimed directly at the camera lens. Hit the rear windshield washer like you normally would and the camera gets sprayed as well. Completely plug-and-play, no drilling, no wiring, no permanent modifications.




Configurations available

• OEM factory swing gate carrier — Hard Top & Soft Top
• Turn Offroad aftermarket carrier — Hard Top & Soft Top

Where to get it

vantagelab.shop

Happy to answer any questions below.

— Mike | VantageLab

Sponsored

 

[cbrenthus]

Very cool!!! I can't believe ford put a washer on the front camera but not the rear. Should be standard on every vehicle!

 

[VantageLab]

Very cool!!! I can't believe ford put a washer on the front camera but not the rear. Should be standard on every vehicle!

Yeah idk why they didn’t. Also I think they may have removed the front washer on ‘26 models?? Not sure about that, maybe someone else can confirm

 

[RedTailHawk]

The ordering option is either Hard top or Soft Top. So I'm guessing this won't work for those who have both types of tops for their Broncos...

 

[MyKidKeepsCallingItAJeep]

Very cool product. I see the instruction manual on your website, but would love to see an installation video to go along with it.

 

[RedBeardoh]

Yeah idk why they didn’t. Also I think they may have removed the front washer on ‘26 models?? Not sure about that, maybe someone else can confirm

I don’t have any camera wash feature on MY 25 BadSas

 

[VantageLab]

The ordering option is either Hard top or Soft Top. So I'm guessing this won't work for those who have both types of tops for their Broncos...

The soft top configuration will also work with the hard top. The main difference is the path that it takes to route the tubing. So if you switch tops, I would recommend going with the soft top configuration

hard top

soft top

 

[RedBeardoh]

The soft top configuration will also work with the hard top. The main difference is the path that it takes to route the tubing. So if you switch tops, I would recommend going with the soft top configuration

hard top

soft top

In that case, if you ever plan to remove the hard top should you also chose the soft top package? Awesome job on the product btw, I have been WAITING for something like this to hit the market!

 

[Y2KFirehawk]

The ordering option is either Hard top or Soft Top. So I'm guessing this won't work for those who have both types of tops for their Broncos...

Those with only the soft top and without the hard top provisions would be different. Since you have both, I imagine you have the provisions for the rear wiper/sprayer so you can choose hard top.

 

[VantageLab]

In that case, if you ever plan to remove the hard top should you also chose the soft top package? Awesome job on the product btw, I have been WAITING for something like this to hit the market!

You still CAN remove the hard top with the included quick disconnect. However, if you have the soft top configuration, the factory washer line will still be connected so you’ll be able to use the washer with the top off. With the hard top config, the washer line disconnects so you’ll won’t be able to use it with the top off. Hope that makes sense.

 

[briankb66]

Very cool! Any discount for forum members or military/vet?

 

[VantageLab]

Very cool! Any discount for forum members or military/vet?

Yes! Use BRONCO6G at checkout

 

[jsoa]

received and installed mine today (TOR variant). Pretty easy install overall, a little harder for me since I have TOR tailgate and JCR tailgate table.

Tested and works good no leaks that I can see (just needed to run a little bit to get the new hoses full)

It did create a little loop but it might just be the way I connected the tubes

The orientation of the clip that holds the hose to the rear window (I put it on backwards initially)

If you have the TOR tailgate, I recommend not taking it off completely and just hanging it by a screw to make it a little easier

And a couple other photos

The window clips, quick release valve and check values are a nice touch.

Minor gripe. the TOR variant instructions says to connect the check value to the nozel housing barb inlet which isn't possible so I used the 2nd small hose instead (hopefully I didn't mess it up and it works out)

I will be interested to see how this holds up after summer and winter cycles.

 

[VantageLab]

received and installed mine today (TOR variant). Pretty easy install overall, a little harder for me since I have TOR tailgate and JCR tailgate table.

Tested and works good no leaks that I can see (just needed to run a little bit to get the new hoses full)

It did create a little loop but it might just be the way I connected the tubes

The orientation of the clip that holds the hose to the rear window (I put it on backwards initially)

If you have the TOR tailgate, I recommend not taking it off completely and just hanging it by a screw to make it a little easier

And a couple other photos

The window clips, quick release valve and check values are a nice touch.

Minor gripe. the TOR variant instructions says to connect the check value to the nozel housing barb inlet which isn't possible so I used the 2nd small hose instead (hopefully I didn't mess it up and it works out)

I will be interested to see how this holds up after summer and winter cycles.

Wow, that was fast! Nice job on the install. Sorry for the confusion, but sounds like you did it right. In the instructions I should have specified using the tubing to connect the check valve to the nozzle housing.

Pro tip: you can actually push the factory tubing into the trim panel for a more flush look where the loop was created.

check out this video to see what I mean:

 

[VantageLab]

For anyone that was looking for an install video, I want to give a shout out to @Destination Bigfoot Bronc for putting one together! You can watch his install here:

Sponsored