Sponsored
TX-Dennis's latest activity
-
And no, there's nothing you can do about it š -
TX-Dennis reacted to Thatguylegit69's post in the thread Something I feel while at a stop with
Haha.
Ducati is always telling people that their shafts are inferior. -
TX-Dennis reacted to EruptionBronco's post in the thread Rubbing with 315/70R17 Terra Grappler G3s with Like.
You won't have constant rubbing, but I believe it will rub at full lock due to the +55mm offset. Badlands non-Sas is only half an inch...
-
Pretty normal loss over a year. But if you see something leaking, worth having it looked at.
-
https://bronco6g.com/forum/threads/tsb-25-2206-2024-2025-2-7l-incorrectly-illuminated-mil-check-engine-with-dtcs-p1299-p1026-and-p2c39.11...
-
Go to an AutoZone (or other similar parts store) and get them to read the codes. Also get them to check your battery. All the codes...
-
TX-Dennis replied to the thread A reliable way to protect door sills: powoq Door Sill Protectors.I've had th I've had those for a couple of years now. Very protective. Very durable. Easy to clean.
-
TX-Dennis reacted to Steve_In_29's post in the thread A reliable way to protect door sills: powoq Door Sill Protectors with Like.
A 2 door version is already available I put a set on my 23 Wildtrak and when it was totaled I bought the same ones for my Heritage...
-
TX-Dennis reacted to RedBeardoh's post in the thread Will the Factory Jack handle the Sasquatch Package? What Jack options do people have? with Like.
When it comes to something Iāll be heavily dependent on in a nasty situation I much prefer simple, mechanical, proven. Iām sure the air...
-
TX-Dennis reacted to Badland-Mansquatch-ATX's post in the thread Will the Factory Jack handle the Sasquatch Package? What Jack options do people have? with Like.
Used the extension, however in your picture the jack is in a slightly different location than mine, so Iāll check that out.
-
TX-Dennis reacted to Badland-Mansquatch-ATX's post in the thread Will the Factory Jack handle the Sasquatch Package? What Jack options do people have? with Like.
Checking at home tonight, I did indeed have the wrong location, which was about 2-3 inches higher and my main problem. Thank you for...
-
TX-Dennis reacted to Rocky-in-AR's post in the thread Will the Factory Jack handle the Sasquatch Package? What Jack options do people have? with Like.
I have used the jack with extension multiple times on pavement and once off road. I've never had a problem with the height. Not sure...
-
TX-Dennis reacted to CitrusBronco's post in the thread Will the Factory Jack handle the Sasquatch Package? What Jack options do people have? with Like.
Your photo shows your using the jack in the wrong location, it should be on the frame, the frame has an arrow stamped on it. see the...
-
TX-Dennis reacted to userdude's post in the thread Will the Factory Jack handle the Sasquatch Package? What Jack options do people have? with Like.
@Administrator can move the thread. There's a little square lift section that goes on top of the jack that I missed when I had to...
-
TX-Dennis reacted to wjtinfwb's post in the thread I received a new owners welcome gift in my oil filter. with Like.
If it came out in strips like that, I'd say its unlikely it made its way up into the engine. If it had, you'd likely have been on the...
-
TX-Dennis reacted to not on the rug's post in the thread I received a new owners welcome gift in my oil filter. with Love.
Initial quality is a lot different than overall/long-term reliability
-
TX-Dennis reacted to McLovin80's post in the thread I received a new owners welcome gift in my oil filter. with Like.
If you didn't already, you should stick the borescope into the drain plug opening to take a peak to see if any metal is in the bottom of...
-
TX-Dennis reacted to not on the rug's post in the thread I received a new owners welcome gift in my oil filter. with Haha.
Anyone else notice the german hand grenade parked in the driveway next to the Bronco? If some metal machining shards from an oil...
-
TX-Dennis reacted to userdude's post in the thread I received a new owners welcome gift in my oil filter. with Like.
Nah, it's more like finding some oil on the air filter first change in a new house. Is the AC going to fail?? My brother just got his...
-
TX-Dennis reacted to Vynull's post in the thread I received a new owners welcome gift in my oil filter. with Like.
Thank you. This is the exact thing I was thinking - that I would never have known had I taken it to a dealer. I'll email them - thanks...
-
TX-Dennis reacted to Retired Old Man's post in the thread I received a new owners welcome gift in my oil filter. with Like.
If you had taken your Beautiful Bronco to the dealer for the first oil change, my bet is that, that filter, and the metal piece, would...
-
TX-Dennis reacted to timhood's post in the thread I received a new owners welcome gift in my oil filter. with Haha.
Given your Bronco has now lost 75% of its value because any future buyer is going to see this post and know your engine could...
-
TX-Dennis reacted to timhood's post in the thread I received a new owners welcome gift in my oil filter. with Like.
I guess you could not feel bad because now you know it didn't come from your engine, nor did it pass through your engine. It's not even...
-
TX-Dennis reacted to Vynull's post in the thread I received a new owners welcome gift in my oil filter. with Like.
I want to keep the filter in-tact to deliver to dealer. There was nothing obvious in the pan. Poured some of the filter oil out to...
-
TX-Dennis reacted to Tybh88's post in the thread I received a new owners welcome gift in my oil filter. with Like.
Did you open the filter to inspect the entire filter? Like another member posted, if it hit any moving parts it would chew that apart...
-
TX-Dennis reacted to HighVelocity's post in the thread I received a new owners welcome gift in my oil filter. with Haha.
I'm tearing down the house because there's a crack in the drywall.
-
TX-Dennis reacted to LVS's post in the thread I received a new owners welcome gift in my oil filter. with Like.
Iām not an expert by any means, but If those metal strips and hit any moving parts they would have been torn to pieces. My guess itās a...
-
TX-Dennis reacted to Gluestick's post in the thread Third Brake Light - using the Ford 7Pin plug ? for 2025-plus OEM module with Like.
You can cut the OEM third brake light wire and use Deutsch connectors to act as extensions to mount it wherever you like. I also got a...
-
You forgot about the sticky seats, cracked top, bad gas mileage, weird gauge cluster, tinny speakers, upright windshield, high...
-
TX-Dennis reacted to Squatch's post in the thread The Official Bronco6G Photo Challenge Game šø š¤³ with Like.
Well, I didn't get to park next to this worthy competitor, but I did see this 1960 Jolly yesterday. -
Seems obvious. Your upgrades aren't really an upgrade are they? Work the problem backwards until you resolve it. That means...
-
TX-Dennis reacted to ducksface's post in the thread Oil formulations are changing due to geopolitics (i.e. Pennzoil Platinum) - time to test your preference... with Like.
I haven't read or heard or seen a legitimate oil brand failure on a modern passenger vehicle. Some worries don't reach me due to my...
-
Nothing says Starbucks mall cruiser like a 4dr with a sticker bashing 2drs. š¤¦āāļø
-
TX-Dennis reacted to EasternSierra's post in the thread 4 car pile up: Bronco vs. GMC Sierra and two others with Like.
Your Bronco may look fine, but there is a good chance of hidden damage. Get it thoroughly checked out by a reputable body shop. There...
-
TX-Dennis reacted to Ted Miller's post in the thread 4 car pile up: Bronco vs. GMC Sierra and two others with Wow.
I was involved in a four car pile-up on the freeway yesterday and my Bronco was the only vehicle able to drive away from the scene. The...
-
Where thereās a will thereās a way. Unmount spare, muscle if off tailgate, roll to front of vehicle, lay on its side (for safety, trust...
-
As a short king, Iād be afraid I couldnāt get the hood back down with those struts that high. š
-
Send me your VIN and I can check for codes. Thatāll be the best indicator of what happened
-
Ass-Probe for the win
-
My wife and I play: Spot the Jeep WITHOUT a duck on the dash game. 1 point per WOD (without duck).... It's typically low scoring and...
-
Based upon experience- First 40 minutes - wife tells me how to drive. Next 2 hours we bitch at each other. Rest of the trip is in...
-
TX-Dennis reacted to Altitude's post in the thread What Made You Fall in Love With Off-Roading? with Like.
For me, it was getting away from the crowds and enjoying amazing scenery. I love going to Colorado and with a family we usually ended up...
-
Insightful contribution š
-
TX-Dennis reacted to dpAtlanta's post in the thread Asked to decide between Ranger or Bronco with Haha.
I know you HATE stickers and 2-doorsā¦. Me, Iām the opposite and itās a good that we have different opinions: Bronco with my stickers...
-
TX-Dennis replied to the thread What Made You Fall in Love With Off-Roading?.In high school friends and I used to run some local "jeep trails" in our compact cars or trucks. It was great fun, and I only got stuck...
-
TX-Dennis reacted to BluebroncoNC's post in the thread What Made You Fall in Love With Off-Roading? with Haha.
Darn my Cousin and his '71 Bronco taking me out on trails back in the 70's in the LA basin. About 20 years back he ran an old trail he...
-
TX-Dennis reacted to ducksface's post in the thread What Made You Fall in Love With Off-Roading? with Haha.
We had a very bad driveway.
-
TX-Dennis reacted to Ducati1098's post in the thread Internal oil belt a future problem on a Bronco ? with Like.
Completely different engine than the bronco has. Considering the Bronco doesn't use a timing belt, I'd say it's pretty irrelevant. Even...
-
Are your roof panels and wiring secure (rear driver's side corner of the cargo area)? My seatbelts clunk against the frame, adjust them...
-
Here ya go