Recent content by jahwild

Thanks for looking out!

Popping in years later to say this happened to my ‘23 model. Ordering the parts now, thanks for the guidance!

My camera would occasionally get the black screen and shifting in and out of reverse would fix it. Got camera replaced a couple months ago per the recall just to get it out the way. Went a while without having issues then all of a sudden full black screen while reversing and it wouldn’t correct...

Planning to use this warn solenoid at the moment: Warn interrupt any bracket recommendations?

Howdy everyone, Apologies in advance as I know this topic has been covered several times but am hoping to get some more consolidated answers. I recently purchased the ford performance winch and have it mostly installed (with capable bumper nonetheless courtesy of this thread). I was looking at...

Been looking at this for removing underbody shields to clean out stuck mud and I am curious if the skid plate numbers are accurate. I found this article - https://performanceparts.ford.com/download/instructionsheets/IS_M-5018-BR4_043024.PDF - that references torquing all skid plate bolts to 35...

For $250 I am super interested in this

Ill do some digging but do you by chance have any links handy to share?

So I skipped step #1 on black friday and didn’t do my research. I have a capable bumper and the lux package with ACC and parking sensors for context. Ended up buying an IAG winch mount and a ford performance winch because I saw the winch was going to be a lot cheaper and I read it wasn’t...

Is this a different balance than the regular tire balance?

Curious why?

Looking to do the same and just wanted to check that you pretty much cut like shown in this image? Connected red to aux 1/2 and white to 3/6?

Also for those of you that do have chains (using them or just holding for inspections) which ones did you get? A quick peruse on Amazon didn’t yield any that would actually fit the tires unless theres a different way to search.

This confused me a little. Are you saying the Sas trims would then have the inner plane aligned meaning the snow chains wouldn’t be problematic for the suspension? Or are you saying it is different for Sas so this would likely require additional offset from spacers to make it safe?

Was looking for snow chains (was having trouble finding ones that fit the sas tires) and ended up stumbling across another thread here that said most don’t use chains on the Broncos but tend to keep some on hand due to regulations. Seems like the MT tires are pretty good on the snow/ice and...