Sponsored
EOD98's latest activity
-
EOD98 reacted to dinglehead's post in the thread Are there any high quality aftermarket bags to go on the roll bars (Like the OEM but not $429) with
Like.
I ended up just ordering the XG Cargo bags directly from them. Found a 15% off coupon code and just bit the bullet as it doesn't look... -
If you have a bolt that fits, take it to Home Depot or most any hardware store and in the aisle with hardware they will have one of...
-
EOD98 replied to the thread Front speaker issues on OEM head unit.Before I installed the DSP, I had replaced all of the factory speakers. Immediately, sounds of clipping at volume 20’ish. With the...
-
EOD98 replied to the thread Front speaker issues on OEM head unit.What year and is it B&O?
-
EOD98 reacted to plugnplaykits's post in the thread 2025 -2026 NON B & O SUB HARNESS COMING SOON with Like.
Update harnesses have been manufactured and in transit to me. Should be available in about 30 days.
-
EOD98 replied to the thread Attica 4x4 Group Buy for Bronco Owners: Let’s Hear Your Thoughts.Confused with your answers…. I’m talking about the lights that are in the roof rack.
-
EOD98 replied to the thread Attica 4x4 Group Buy for Bronco Owners: Let’s Hear Your Thoughts.I get it but where do wires enter the vehicle?
-
EOD98 replied to the thread Attica 4x4 Group Buy for Bronco Owners: Let’s Hear Your Thoughts.Thanks! I took a look at the instructions and didn't see any info about the wiring for the lighting. I am sure its easy to connect but...
-
EOD98 replied to the thread Surface mounted A-Pillar tweeters - has anyone done or seen flush mounted? (With pic).I see these are only available for 2021-2023. Any chance they would also fit a 2025? Looking at the OEM part on the Ford parts site...
-
EOD98 replied to the thread Attica 4x4 Group Buy for Bronco Owners: Let’s Hear Your Thoughts.Anyone have feedback/experience with their roof rack? Looks nice, Does it work with painted tops?
-
EOD98 replied to the thread Raise Rear View Mirror - SOLUTION: Mirror Riser.Doesn’t work if you have a Wolfbox. At least it didn’t for me.
-
EOD98 replied to the thread Cigarette lighter Plug replacement Options.Why not use an Anderson plug?
-
EOD98 reacted to Chrome_Pony's post in the thread Cigarette lighter Plug replacement Options with Like.
Blue Sea Systems 12V Twist-lock is probably the easiest replacement. Going to have to rewire both your device and the port, though.
-
Lots of ways to tackle that. Least intrusive would probably be to put a whip around the cable and strap it around to something near so...
-
EOD98 replied to the thread 2026 B&O System ADDING ANOTHER SUB/AMP.Definitely call Joe. Much easier. He will tell you exactly what is needed. His number is at the top of his website.
-
EOD98 replied to the thread 2026 B&O System ADDING ANOTHER SUB/AMP.T-Harness from Joe at plugandplaykits. Easy peasy
-
EOD98 reacted to mastermind9182's post in the thread New PLUGNPLAYKITS PNPKITSPRO TO ADD NEW SUB FOR 2025-2026 with B & O with Like.
Does this LOC completely get rid of the bass roll-off? Looking for a solution that does not require getting rid of the factory amplifier...
-
TLDR: You get what you pay for, for the most part. It's more of a question of budget and what you will be satisfied with. Component, in...
-
EOD98 replied to the thread Speakers replacements.Is it smarter to go the component speaker direction or will an audison, hertz or focal 4” give me more clarity than my amplified Kicker...
-
EOD98 reacted to Brian_B's post in the thread Audio Upgrade Sound Deadening - worth the cost & time to install ?? with Haha.
Also for the folks that haven’t had the joy of going back in after some time passes : The rubber gets all goopy and sticky over time -...
-
If you have a friend with a 3D printer you can just print a clip. with a part that hangs down. I did that and also included a camera mount.
-
EOD98 reacted to Moomoosaysthecow's post in the thread Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts. with Like.
In addition to the rear camera blower project above, I also did two more projects that are more 3D printer heavy. Parking/Blindspot...
-
EOD98 reacted to Wildtrac24's post in the thread Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts. with Like.
Most of what I have 3D printed are download from various maker spaces. I did design this soft top mount cover.
-
EOD98 replied to the thread Footwear for offroad.I do the same, chacos and a gortex boot
-
EOD98 reacted to BigMeatsBronco's post in the thread (Update 11/8/25...Its ALIVE!!!) 760hp 5.2 supercharged (GT500) Predator engine swap Bronco info thread with Like.
Good idea! Ill consider that. If this price is real, these could be an inexpensive alternative...and you could always add a...
-
EOD98 reacted to Hats4Bats's post in the thread MB Quart plug-and-play audio system options debut (subwoofers, speaker pods, amp) with Like.
I ended up talking to them and they said to expect them to stay on for about 75 minutes until the BCM turns off power to the 12V jack in...
-
Very nice! Due to some hearing loss, there's no such thing as 'too bright' for me. My ears have a built in crossover haha. So...
-
They did fine after DSP tuning, otherwise they were too bright. At the time I had the ZenA2B and a JBL DSP4086, plus a kicker amp for...
-
All amps are plug and play - just varying levels of “plug” The 6 channel DSP amps function as 5-channel once you bridge one set for the...
-
EOD98 reacted to GearShade's post in the thread 2025-26 B&O Audio upgrade - Zen Power-9 F25 with Like.
Due to manufacturers using slightly different specs for their own sub, we design the box specifically for that sub. We can design it...
-
EOD98 replied to the thread Help with Trail Seven speaker upgrade.Yeah the B&O is tuned for the stock speakers so any upgrade can potentially sound like crap. Replacing dash speakers tends to work out...
-
EOD98 reacted to XirallicBolts's post in the thread Battery Maintainer/Tender and Battery Management System. with Like.
I did the same thing, same location. Welded up a stainless steel bracket at work to act as a mount. There's a bit of square tubing...
-
EOD98 replied to the thread Has anyone used the Hooke Rear Storage Cargo Rack that mounts to roll bar.Thank you!
-
-
EOD98 replied to the thread Has anyone used the Hooke Rear Storage Cargo Rack that mounts to roll bar.
-
EOD98 reacted to cat69man's post in the thread Has anyone used the Hooke Rear Storage Cargo Rack that mounts to roll bar with Like.
No, not at all.
-
EOD98 replied to the thread Has anyone used the Hooke Rear Storage Cargo Rack that mounts to roll bar.Does it interfere with 6.5 speaker pods?
-
EOD98 reacted to plugnplaykits's post in the thread Anyone use the Kicker downfiring sub enclosures? with Like.
If anyone needs any kicker products including the downfiring boxes amplifiers , speakers and I also offer plug-and-play harnesses for...
-
The fact that you have an aftermarket Kicker Key amp is the smoking gun here. When the Sync screen greys out the speaker icon, it means...
-
EOD98 replied to the thread Speakers replacements.I like the idea of having a sub enclosure that isn’t taking up the whole cargo space and can be easily removed. I went with a downfiring...
-
EOD98 replied to the thread Speakers replacements.There are cheaper empty pods, like Mabett maybe
-
EOD98 reacted to Ukko Wildtrak's post in the thread Has anyone verified that the PAC LPHFD31 LocPro Advanced T-Harness fits the 2025 badlands non B&O? with Like.
I have the 24 Wildtrak non-B&O and this part number worked for me. I would use a mirror or some kind of small camera to look up at the...
-
EOD98 replied to the thread AI tuned my Mobridge!.I used AI to help tune my Musway DSP. Very helpful for install advice as well.
-
EOD98 reacted to Big K's post in the thread ResoNix Sound Treatment Installed + Full Audio Upgrade Update (2025 Badlands) with Like.
10 channel
-
EOD98 reacted to Brian_B's post in the thread Using factory pre-run wires for always-hot accessory power (bypassing upfitter switches)? with Like.
Sure, they would work fine for a starlink. They are just pre-run wire, there's absolutely nothing special about them. They don't have...
-
EOD98 replied to the thread ResoNix Sound Treatment Installed + Full Audio Upgrade Update (2025 Badlands).Nice work! Kind of like the DV8 one that I have but space is better on yours. I put two amps in my DV8 storage and did two 1.25" grommet...
-
EOD98 reacted to bklagrone's post in the thread ResoNix Sound Treatment Installed + Full Audio Upgrade Update (2025 Badlands) with Like.
Just finished installing the ResoNix CLD and sound treatment kit on my 2025 Bronco Badlands. I probably covered more area than necessary...
-
EOD98 replied to the thread 2025-26 B&O Audio upgrade - Zen Power-9 F25.It looks like it installs in the same spot as the factory DSP/Amp and you could keep the factory sub and enclosure or do the smart thing...
-
EOD98 replied to the thread 2025-26 B&O Audio upgrade - Zen Power-9 F25.Gotcha. Not sure how I missed that update.
-
EOD98 reacted to dougcjohn's post in the thread 2025-26 B&O Audio upgrade - Zen Power-9 F25 with Like.
Their communication to me was it was the new improved version of the MoBridge… in multiple ways. Cleaner processing, larger heat sinks...
-
EOD98 replied to the thread 2025-26 B&O Audio upgrade - Zen Power-9 F25.I am definitely interested in the NAV-TV Zen Power-9 F25 because it supports 2025 B&O. I could get rid of my crappy PAC Amp Pro and one...
