2025-26 B&O Audio upgrade - Zen Power-9 F25

[vjose8]

Just in case anyone wanted to see....

Once we get the mounting hole layout nailed down, these will be available on our site:
https://additivecaraudio.com/

Our sub boxes work with most shallow-depth subs.

Would an Alpine RS-W10D4 sub also fit in this enclosure?

https://manuals.alpine-usa.com/products/documents/OM_R-Shallow_Subs.pdf

Sponsored

 

[GearShade]

Would an Alpine RS-W10D4 sub also fit in this enclosure?

Yes, it would. We have made boxes for this sub before. A box for this sub is not listed on our site. So we would have to make one custom for you.

 

[dougcjohn]

I posted a pic of how its mounted over here:
https://www.bronco6g.com/forum/threads/hi-all.69025/page-12#post-2827874

It mounts on the factory box, it is the only aftermarket amp that does this. It is also directly intergrated into the factory a2b bus same as the outgoing K2.
Its the most advanced bronco amp replacement on the market by a country mile.

If you are in Socal some listen to our demo truck!

How’s the Bronco Zen Power-9 F25 ‘Kit" coming along?
Any update on availability timeframe?

 

[mObridge]

How’s the Bronco Zen Power-9 F25 ‘Kit" coming along?
Any update on availability timeframe?

Shipping now!

 

[dougcjohn]

Shipping now!

Great to hear... is the kit on the web site or special order through you.

Jumped on NavTV web site. I see the zen power9, don't see a Bronco Kit.
You had indicated completion on bronco kit... wiring, etc.
Am I looking in wrong area?

https://navtv.com/products/NTV-KIT1051/zen-power9-f25.html

 

[kcbronco]

Shipping now!

Do you have a link to the kit. Missing my mobridge setup I had in my 23 Bronco and want to upgrade my 25 Bronco with B&O

 

[dougcjohn]

Do you have a link to the kit. Missing my mobridge setup I had in my 23 Bronco and want to upgrade my 25 Bronco with B&O

My limited communication, I can provide Fraser's Links he provided when I purchased about 1 week ago.

Here’s the link provided to me to order kit.
Depending on the enclosure you utilize, the mount bracket may be needed.
I purchased the Additive Car Audio Enclosure for the Zen Power 9 25+ and 10" Sub and it doesn't need the bracket. The OEM Enclosure does require the mount bracket.

Link to Power 9 Kit: (Kit can include the mounting bracket)
https://www.zenaudio.com/products/zp9-bronco-kit-b-o-25

Link to Power 9 Amp:
https://www.zenaudio.com/products/zen-power-9-f25

Side Note:
The Additive Car Audio Enclosure is very nicely designed and manufactured.
Their 10" Sub Enclosure... I'm mounting the Rockford without issue.
https://additivecaraudio.com/shop/bronco-subwoofer-10tw3/

For refernce in above posts:
Rockford Fosgate T1S2-10s
https://rockfordfosgate.com/products/details/t1s2-10s/

Audison Prima Plus:
https://trailseven.com/products/aud...5Ph_oDUfbz5uAc3RC30nMJ91MKuXCcywaAttVEALw_wcB

 

[dougcjohn]

Install complete. The box from additive fit well. William is waiting on Fraser to send some revised schematics as the original CAD mounting holes don't match up with the Zen amp. My installer crafted a bracket so all is well. The sub sounds great and I didn't have to sacrifice tailgate space for the very capable 10TW3 sub. The Audison speakers are very very bright but the audio clarity and high end detail is fantastic and have been able to tune them down to a balanced level.

Been a while with your Audio setup... any additional comments or suggestions?
Great to read the Audison Prima Plus sound super! Looking forward to getting mine setup.

Have you had the top off yet, how does audio compare to OEM B&O in open air: clarify and volume?

 

[EOD98]

I’m slowly migrating towards a mostly (90%) Audison setup. I just have audiocontrol pnw series for tweeters and 6.5 in the rear pods. Other than that, everything is Audison now. Dash left right and center, kicks, dsp (M12.14 bit), and two mono amps (MD1) all Audison. Thought about Helix but Audison DSP software won me over.

 

[dougcjohn]

I’m slowly migrating towards a mostly (90%) Audison setup. I just have audiocontrol pnw series for tweeters and 6.5 in the rear pods. Other than that, everything is Audison now. Dash left right and center, kicks, dsp (M12.14 bit), and two mono amps (MD1) all Audison. Thought about Helix but Audison DSP software won me over.

How’s it all sounding! All tuned to your satisfaction!

ya the more I looked & compared… the Audison set seemed the way to go. I’ll find out once the Amp/DSP arrives and I get started on it all.

 

[EOD98]

Definitely tuned to my satisfaction. Even the basic tune sounded amazing compared to anything non-dsp I’ve had before. Tuning is a rabbit hole for sure. It’s just so easy to make changes. Having fun and the sounds amazing

 

[kcbronco]

My limited communication, I can provide Fraser's Links he provided when I purchased about 1 week ago.

Here’s the link provided to me to order kit.
Depending on the enclosure you utilize, the mount bracket may be needed.
I purchased the Additive Car Audio Enclosure for the Zen Power 9 25+ and 10" Sub and it doesn't need the bracket. The OEM Enclosure does require the mount bracket.

Link to Power 9 Kit: (Kit can include the mounting bracket)
https://www.zenaudio.com/products/zp9-bronco-kit-b-o-25

Link to Power 9 Amp:
https://www.zenaudio.com/products/zen-power-9-f25

Side Note:
The Additive Car Audio Enclosure is very nicely designed and manufactured.
Their 10" Sub Enclosure... I'm mounting the Rockford without issue.
https://additivecaraudio.com/shop/bronco-subwoofer-10tw3/

For refernce in above posts:
Rockford Fosgate T1S2-10s
https://rockfordfosgate.com/products/details/t1s2-10s/

Audison Prima Plus:
https://trailseven.com/products/audison-prima-plug-play-speaker-bundle-upgrade-21-current-ford-bronco?currency=USD&country=US&variant=46764769837309&utm_source=google&utm_medium=cpc&utm_campaign=Google Shopping&stkn=82c12a081cdd&gad_source=1&gad_campaignid=19504935324&gbraid=0AAAAApJhy5BMJYUbWB2PRLhyCaICq-9WX&gclid=Cj0KCQjw2OnUBhC2ARIsACKyfaEufghmKrHXbbcmMahlLTe5Ph_oDUfbz5uAc3RC30nMJ91MKuXCcywaAttVEALw_wcB

Thank you so much.

Sponsored