Sponsored
Ape Factory's latest activity
-
Ape Factory reacted to 7722 Bronco's post in the thread VERY close on a raptor and have a few questions for those that own one with
Like.
I'm coming from a built '22 Wildtrak with ProCal tune so I have a little insight. My Wildtrak on 37's with the tune runs like it is... -
Ape Factory replied to the thread Rented a Bronco in St. Thomas.Interesting! I'm headed there next week and we reserved a Jeep. We'll have to see if we can swap over to a Bronco once we get there...
-
Ape Factory replied to the thread MPG.I've seen as high as 19 mpg but a lot of that is all by the trip meter and you can change your results significantly by resetting it. I...
-
Ape Factory replied to the thread Raptor or Filson?.Pretty sure I already did me but thanks for the passive aggressive slight and your permission for me to be me. Get the cost scenario...
-
Ape Factory replied to the thread Raptor or Filson?.I was the same, didn't like the fenders at all at first, and now I do. There's so much extra engineering that goes into the Braptor...
-
-
Ape Factory replied to the thread MPG.I find it's very dependent on wind speed. I drove into a continuous 45mph wind (Texas) and saw a 5 mpg drop from my usual over a 100...
-
Ape Factory reacted to GooseTuned's post in the thread GooseTuned - New 2026 R&D Bronco Raptor?! with Like.
I can do that! If you are currently tuned by me just reach out in our email thread and request a change to 3rd specifically!
-
Ape Factory replied to the thread GooseTuned - New 2026 R&D Bronco Raptor?!.Option for a sport mode without the awful downshifts (esp 3rd gear downshift) but all of the responsiveness that comes with that mode vs...
-
Ape Factory reacted to userdude's post in the thread Tired of the Sticker Blight on Trails?? with Like.
We have bullet holes round these parts.
-
Ape Factory reacted to BA OffRoad's post in the thread Bronco6G One-Week Special | Overhead MOLLE Panel — $50 OFF + FREE Hard Top Storage Bag for the First 50 Orders with Like.
We’ve already shared the demand for a BRaptor-compatible version with our product team.
-
Ape Factory replied to the thread Bronco6G One-Week Special | Overhead MOLLE Panel — $50 OFF + FREE Hard Top Storage Bag for the First 50 Orders.Have anything that works for BRaptors?
-
Ape Factory replied to the thread Just got a recall notice: harness in the engine bay.Definitely would go through the recall but in the meantime, I'm going to check the wires in question and protect them while I wait for a...
-
Ape Factory reacted to Eldowerks's post in the thread Just got a recall notice: harness in the engine bay with Like.
Amazon has the high temperature convolute tubing with the high temp tracer marking, in all three sizes, as well as the chloroplast tape.
-
Ape Factory replied to the thread Just got a recall notice: harness in the engine bay.Thank you and apologies, thought that was a link to the thread in its entirety. I may just tackle this myself for peace of mind. Just...
-
Ape Factory replied to the thread Just got a recall notice: harness in the engine bay.Know which post number that was?
-
Ape Factory replied to the thread Just got a recall notice: harness in the engine bay.I gave my engine bay a quick look on the passenger's top side and didn't see anything super alarming. Only thing I saw was the spot...
-
-
Ape Factory replied to the thread Driving BLIND in heavy rain!.Have to agree, as a former resident of Florida, it rains HARD. Texas rains are like a light Florida sprinkle most of the time but there...
-
Ape Factory replied to the thread Ran 2/3rds the roof and a cargo cover.Interesting! I've certainly done the reverse, front and passenger's panels removed but rear in place. I have an EZ Trunk installed... -
Ape Factory replied to the thread Bronco Raptor Spark Plug help.They're $9.32 each on Rockauto.com.
-
Ape Factory reacted to Spooled's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
I just installed a set of the front bumps. I'm jumping it Saturday so they will get put to use quickly.
-
Ape Factory reacted to demos1970's post in the thread Ford offering Navigation after trial - is it worth it? with Like.
I had to laugh at some of the things you wrote. Brought me back too when I drank water out of a hose especially on those hot summer...
-
Ape Factory replied to the thread Ford offering Navigation after trial - is it worth it?.I'm almost embarrassed to say it but I went to wash the mud off the Bronco the other day. I turned the hose on and got hit with that...
-
Ape Factory replied to the thread Ford offering Navigation after trial - is it worth it?.Pro tip if it hasn't been mentioned, you can download areas in Google Maps to your phone so that if entering an area with spotty or no...
-
Ape Factory replied to the thread Product Update: powoq overhead sunglasses holder is now live!.Have one, not sure if it's your brand or not (it's a few years old) and I do use it for sunglasses as it tends to keep them out of other...
-
-
Ape Factory replied to the thread Simple hard top removal question…….Now that you mention it, I do actually have mad camera skills (really) but that's for another time :). Here's a link to the stickers...
-
Ape Factory replied to the thread Simple hard top removal question…….If I It's a sticker but fairly thick. It holds up reasonably well. I'll see if I can remember where I got them and post it up here...
-
Ape Factory replied to the thread Simple hard top removal question…….There are indeed. I have converted mine with tool-less knurled thumbscrew bolts (see pic). They're the generic e-bay version as the...
-
-
Ape Factory reacted to RK Racing's post in the thread Simple hard top removal question…… with Haha.
No Bueno……
-
Ape Factory replied to the thread Simple hard top removal question…….I bought a cheap winch system off of Amazon and use straps that run the length of the top. Super easy to get on and off. Took a bit...
-
-
Ape Factory replied to the thread Simple hard top removal question…….My knees hurt just watching the video.
-
Ape Factory replied to the thread 2026 Braptor Oil Drain Plug Advice……. Thanks..Go with the extraction method. Much easier and cleaner, and you'll never have to mess with an oil plug again...
-
Ape Factory reacted to TheLawnDart's post in the thread Upgraded Bronco Raptor Bump Stops (3D Printed)!! with Like.
Just announced, new bump stops for the Bronco Raptor! I started testing these months ago and went through multiple iterations. Each...
-
Ape Factory replied to the thread Is this your Bronco?.I'm from the area and was there on July 4 (and again this year during the floods). It's not AI and in fact, happened. That's mild...
-
Ape Factory replied to the thread Simple hard top removal question…….I remove my hard top all the time by myself but I'm also clipping it in to a winch system and pulling it up into the ceiling. Very easy...
-
Ape Factory replied to the thread Bronco Raptor - Daily Driving Concerns?.This. I went from a 500hp sport car to the Braptor and the chassis dynamics are actually fantastic, with the tires being what holds it...
-
Ape Factory replied to the thread Bronco Raptor - Daily Driving Concerns?.Daily drive mine in urban big city environments including occasional jaunts to the next city for a 210 mile round trip. Other than gas...
-
-
Ape Factory replied to the thread Recall 26S55: 2021-2026 Bronco - Engine Compartment Wiring Harness Repair [July 23, 2026] -- 590,000k units affected.Screaming inside my head. One more thing to do this weekend. Thanks for the photos jsoa, I know where I can start looking! Luckily I...
-
Ape Factory replied to the thread BRaptor 6.5" Rear Speaker Pod upgrades are available!.I don't have the SSV version but another as there was only one option way back when. I will say upgrading to a 6.5" speaker is just...
-
Ape Factory reacted to Texas_Raptor's post in the thread What Did You Do To Your Bronco Raptor Today? 🔧 🧰 🪛 with Like.
Paint matched door handles and mirror caps. Should have came from the factory this way. Reinstalling the handles took a few tries, but...
-
Ape Factory replied to the thread Pikes Peak in a Bronco ?.Ooof. Not a good spot to pick and a bad photo angle anyway...but yeah, cool ass Bronco. PP's pretty challenging to say the least! -
Ape Factory reacted to EvilJim1971's post in the thread Don't Ignore The Interior of The Frame Rails ~ Chassis Flush with Like.
Yup I have seen people buy cars from the coast and cuss every time they had to work on them. Southern vehicles have me spoiled. I just...
-
Ape Factory replied to the thread CACTUS GRAY Bronco Club.Twinsies in San Antonio. And here I thought I was the only CG in the village. For the Little Britain Fans. -
-
-
Ape Factory reacted to simplejack's post in the thread What Did You Do To Your Bronco Raptor Today? 🔧 🧰 🪛 with Like.
Put her in the parade
-
Ape Factory replied to the thread Fender flare recall.You'll never know.
-
Ape Factory replied to the thread Fender flare recall.You get used to the flares and actually come to appreciate them. With the top off, I think it actually looks pretty bad "ass" from the...
-
-
Ape Factory replied to the thread Factory Stackable Hard Top coming in the future?.I like. I often take off the front and passenger panels and there's obviously nowhere to easily store them without putting the rear...
-
Ape Factory replied to the thread SW Colorado, Brappy, and the top of the world..Curious about the roof storage. Is there a bracket made for the passenger rear panel or something? Looks like an amazing trip. I'd...
-
Ape Factory reacted to MongoTheBronco's post in the thread Looking for wheel suggestions for my Bronco Raptor with Like.
I ended up going with the KM 446s in blue and Nitto Ridge Grapplers 37s. It's the perfect amount of pop and unique-ness without being...
-
Ape Factory replied to the thread AI tuned my Mobridge!.If you still have the dialogue, it might be helpful to some of the AI newbies if you copied/pasted your prompts so they know how to...
