NEW Flashcal+ Bronco Support!

[N8do]

Probably something you already tried, but did you attempt to read the codes and clear them? and if so did they just come back right away?

and also when you were bringing up the error about adding maintenance to the Ford app, I was able to click on both modern fords and the screen came up to add something, but earlier I remembered it just saying no.. I have nothing to add but both of mine are bringing the screen up to add. Is yours at least doing that, or does it just give you an error when you tap the button to add?

I cleared the codes via the Flash+ each time once it cleared up the "wrench" on the reload of tire info or Tire Wizard. It happened several times over a couple days trying to get the speedo to match GPS precisely. Wizard said the vehicle was at a speed slower than what was displayed and Google didn't agree either. 3 different speeds that didn't match the dash.
When I try to access my vehicle service records via the App, entered the tire change, then it no longer saves my entries. Then I noticed the several drive train error fault records in the service history. It was watching and recording the glitches.....hence my concern what the dealership may say soon at my 30K inspection.

Sponsored

 

[chopperbobby]

I updated the dongle and it worked. Took about 8 minutes to load up 43 files.

now have Sport mode!

wish the directions were more clear about this.

Directions?

 

[Tybh88]

Ones that did receive directions did you have to manually enable speedometer recalibrate? Mine gets pissed off when i try and do any changes. It works but i get the damn wrench still. Im still in the debacle of issues with my device that even holley guys cant pin point it.

 

[Superchips_Mktg]

Ones that did receive directions did you have to manually enable speedometer recalibrate? Mine gets pissed off when i try and do any changes. It works but i get the damn wrench still. Im still in the debacle of issues with my device that even holley guys cant pin point it.

Sounds like you got some logs over to the team last night or this morning, so they're looking into what happened and will sort it out.
Thanks for being patient.

 

[Superchips_Mktg]

is It is working for me.


The smaller device I think is only used for Jeeps.
The larger one I plugged in to my OBD2 port used the App to make some changes and unplugged it. I also ran a software update on the programer, that did take some time.

Awesome, enjoy.

And yes, the bypass module is for Jeeps, can toss it

You wont have any more long updates to deal with moving forward ideally. Let us know if you have any other feedback!

 

[Superchips_Mktg]

I updated the dongle and it worked. Took about 8 minutes to load up 43 files.

now have Sport mode!

wish the directions were more clear about this.

The update wont be necessary for any newer units built since we launched, its a byproduct of some devices that have been on the shelf or in distribution most likely. Moving forward, it should be a quick and easy affair anytime you want to make changes.

 

[SamIAm66]

The update wont be necessary for any newer units built since we launched, its a byproduct of some devices that have been on the shelf or in distribution most likely. Moving forward, it should be a quick and easy affair anytime you want to make changes.

So, for clarity, are you saying for those purchasing now and going forward, the update prior to using will NOT be necessary?

 

[Superchips_Mktg]

So, for clarity, are you saying for those purchasing now and going forward, the update prior to using will NOT be necessary?

If it comes directly from us, it will be current. If it comes from a reseller, it may not be on the latest firmware and may need the ~8 minute update.

 

[NotMchlRly]

Yes, I noticed that and my family complained it. LOL. What updates did you make? I turned off the equalizer (no idea what that does as my 23 was a amp/sub delete (with fake amp and sub installed, replaced with Ford Fusion and an Amazon special speaker)), tried the windows up but it doesn't work. oh, yes and changed to the double press on the panic alarm.

Does it seem like anything other than the sound changed for you? Maybe I'm just being paranoid but it seems like the sensor behavior itself is different, at least for the front of the vehicle.

 

[Scooter M'Gee]

Does it seem like anything other than the sound changed for you? Maybe I'm just being paranoid but it seems like the sensor behavior itself is different, at least for the front of the vehicle.

When I turned off the factory EQ I did not like the change in sound. It muddied up and I lost a bunch of highs. I also noticed that when turning the Bronco on the volume level always reverted back to 6, not last known. I just turned the EQ back on. Me no likey.

 

[Boostedblues]

Alright! i finally received mine! I tried updating it which took longer than expected. so long that the bronco timed out and shut off and the app said there was an issue. I tried it all again and came up with an error. But it must have somehow worked because i was able to make changes. I shut off the chimes, added global up windows, WHICH WORKED!! Killed auto stop and the double honk. and added rock crawl. it worked pretty good. the only thing i noticed is that it reset my view in the das menus so i had to go in a reconfigure that and the tpms sensors weren't recognizing the tire PSI. a short drive and it all showed up. not a big deal.

 

[Walker1]

@Superchips_Mktg
I received mine yesterday and made numerous adjustments this morning. Everything worked as it should.

I am currently running Oracle Flush Tailights which create hyper flash on the interior turn indicators. I know this can be fixed with Forscan. Is there a way to adjust it through the Flashcal+ also? If not can you add that to the list of future options?
Thanks

 

[Superchips_Mktg]

@Superchips_Mktg
I received mine yesterday and made numerous adjustments this morning. Everything worked as it should.

I am currently running Oracle Flush Tailights which create hyper flash on the interior turn indicators. I know this can be fixed with Forscan. Is there a way to adjust it through the Flashcal+ also? If not can you add that to the list of future options?
Thanks

Glad you are enjoying it! I've added the hyperflash disable request to our list

 

[Superchips_Mktg]

So does it have the Bambi mode? Fogs and highbeams on at the same time? If I missed the answer sorry it is a lot to keep up with…….

Confirmed this is already there, we have it mislabeled as Fog Light enable. It will actually enable Bambi Mode. We'll relabel this and add an enable/disable for factory fog lights.

 

[Superchips_Mktg]

This was asked by Mr Nick on page 3 of this thread but I didn’t see a response after reading through all 14 pages so far. This referring to the lane change signal flashes when you push the turn signal partially down without fully engaging the turn signal. I believe forescan can make this change.

“Ability to increase the number of flashes for lane changes from 3 to 4, 5 or 6.”

We apparently investigated this during development and found that it only works on a small group of Broncos and wasn't easily identifiable as to which ones supported these changes.

Sponsored