What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Gbauer]

Swapped out the Flowmaster FlowFX for a Borla Touring. After the Flowmaster I wanted some quiet. Probably should have gone with the next loudest Borla but at least my kids wont lose their hearing now.

Sponsored

 

[cynicalrider]

Me too my welding and fab skills are mid at best. This is the work of a local shop and the gentleman that is their main fabricator does amazing work.

Stellar Built right? I wish they were my "local shop" they make good stuff. I assume the exhaust had to be relocated for this still correct?

 

[Returntothefog]

big bear trip was full of mud and water fording.
The next day made it up to Bronco Knoll!

not bad for 4 month experience newly

 

[Enginerd]

More Anza Borrego fun. It’s so cool to see how much the washes and landscape change after a good rain.

Been meaning to camp for two weeks but the rain rain rain. Finally, we just went for it.

Bronco was fun as always, and now properly dirty and muddy.

My 14 year old daughter kicks me out of the drivers seat every time we get off pavement.

A few shots of the Anza Borrego Badlands. We took a fun off the beaten path looooong way to the crowded but always beautiful Fonts Point overlooking Badlands.

 

[ThunderFlash]

Ding, dong double honk is dead! My first FORscan foray. Also turned off the seatbelt and door ajar chimes (light and screen warning still function). So nice. I can stop, leave the truck running with door open to get the mail, then drive the last 300 feet to the house without having the crap scared out of me and being accosted by constant chimes! It will be really nice on the trails getting in and out all the time. Next will be activating fog lights on our '24 and cornering lamps on the '22.

Edit: oh so nice to get in a peaceful vehicle and just do my thing without being harassed by nannies (or out in the case of the double honk). Now I can go to my "Calm Screen" and have a zen experience. It's worth the effort.

 

[Desmolicious]

Awesome off road adventures and fixing annoying chimes?

Pshhhh.. does not compare to me taking 90 seconds to bolt on -using existing hardware - these life changing bottle holders/door storage compartments.

Before:

Brace yourselves, AFTER:

 

[A51SASBUILD]

Installed Dobinsons MMR suspension + UCA’s + Rockjock anitrock + track bar relocation

I’m looking into the same suspension any likes/dislikes also do you have a photo of where the resi is installed at? Would greatly appreciate it

 

[Bronco Damen]

Installed my first couple of mods! Ronin 8-inch antenna and some fancy valve stem caps.

 

[23OBX2.7]

Had more PPF installed on front roof rail, A pillars & front flares. Received IData FO5 harness in prep for Mobridge or IData AtoB module after receive new Hertz MPBX300S2 loaded sub.

 

[TXAstro]

Shocks have been great. A good improvement over stock SAS suspension. I primarily run moderate trails and they have performed well on low settings and provide more travel. I went with 2” of lift. The only dislike is the rear shock rebound screw is almost unaccessible to reach and adjust. I set mine at 50% and will leave. Recommended setting prior to install.

I’m looking into the same suspension any likes/dislikes also do you have a photo of where the resi is installed at? Would greatly appreciate it

 

[A51SASBUILD]

Shocks have been great. A good improvement over stock SAS suspension. I primarily run moderate trails and they have performed well on low settings and provide more travel. I went with 2” of lift. The only dislike is the rear shock rebound screw is almost unaccessible to reach and adjust. I set mine at 50% and will leave. Recommended setting prior to install.

have you had any issues with the uca mashing the line to the resi at all?? im going to the JKS Max tire clearance kit for 37’s but this kit mounts without issue for that just wondering from someone that has the kit. Thank you so much for the insight!

been looking at these and kings

 

[TXAstro]

No issues with uca crimping line. I'm using icon dj pro.

have you had any issues with the uca mashing the line to the resi at all?? im going to the JKS Max tire clearance kit for 37’s but this kit mounts without issue for that just wondering from someone that has the kit. Thank you so much for the insight!

been looking at these and kings

 

[Mean Green]

Little one…

 

[JeebusCripes]

Sold it I spent 569 days with you all waiting for the thing to arrive. After 2.5 years and 83k miles I upgraded.

Seeing it online and available for purchase made me sad

 

[5GENIDN]

I upgraded.

Assuming from the first photo you might have moved just to the right of center?

Sponsored