What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[23OBX2.7]

Forscan adjusted heated seat temps on H,M, L adjusted steering wheel heat level a bit higher, disables double horn honk, enabled auto lock walk away, disabled auto stop start (not sure if it's working) enabled fog light with DRL, tried to adjust rear pod setting no luck.

Sponsored

 

[ThunderFlash]

Forscan adjusted heated seat temps on H,M, L adjusted steering wheel heat level a bit higher, disables double horn honk, enabled auto lock walk away, disabled auto stop start (not sure if it's working) enabled fog light with DRL, tried to adjust rear pod setting no luck.

Getting ready to dip my toes in the Forscan waters to put factory switch fog lights on the wife's WT. I'm not going to lie, I'm a little nervous about it. Nothing frustrates me more than computer type issues and I feel like I'm walking in a potential mine field of problems!

 

[23OBX2.7]

Getting ready to dip my toes in the Forscan waters to put factory switch fog lights on the wife's WT. I'm not going to lie, I'm a little nervous about it. Nothing frustrates me more than computer type issues and I feel like I'm walking in a potential mine field of problems!

Just back every category up first, use the forscan guide, can always reload the back up if doesn't work.

It's easy to use see the video first though to save learning time.

 

[Hammerli22]

Added TOR rotopax mount with 3 gallon rotopax. Bolted on stock hinges with SAS 35 inch tires.

 

[Mystical_Sasquatch]

Harbor Freight barfed Apache 4800's onto my molle panels. Nice to get all the recovery gear out of the inside.

 

[EvilJim1971]

I hear you! I'm in the same boat with my stock GYs...25K and they look like they have another 20K to go!

Over 47k on the factory Goodyears, still good tread left.

 

[DarthLincoln]

Harbor Freight barfed Apache 4800's onto my molle panels. Nice to get all the recovery gear out of the inside.

First time I’ve seen that grille on a white Bronco. It looks great all white!

 

[Mystical_Sasquatch]

First time I’ve seen that grille on a white Bronco. It looks great all white!

Thank you! I need to find black lettering overlays or replacement letters. The yellow doesn't match the rest of the rig.

 

[PowerBronco]

Did a quick Moab trip after Christmas. Got back home yesterday. Ran a couple of trails while we were there, along with a ton of hiking.

 

[Fastmc25]

Went on a New Years Day hike in the mountains today. Took the Bronco up on some steep washout road/trails to get to the top trailhead

 

[DarthLincoln]

Thank you! I need to find black lettering overlays or replacement letters. The yellow doesn't match the rest of the rig.

Black letters would look great and match with the black ”Bronco” script on the fender, and the other black details.

If you used screws to mount the OEM letters, I suggest taking them off and paint them with removable Hyperdip spray to try it out.
https://www.dipyourcar.com/collections/hyperdip-aerosols
I used the ‘Frozen Black’ to blackout my tailgate horse emblem well as my entire grille and it is very durable, but let‘s you peel off to try something else.

 

[not on the rug]

Nice! I made something similar…l don’t have a welder but I have a 3D printer. Mine is a magnetic mount for my iPhone for recording videos, but it makes a nice target sight when not used. I am imagining some rockets wired to an Aux switch

How about a 25mm rotary cannon off an AC-130?

 

[ThunderFlash]

Harbor Freight barfed Apache 4800's onto my molle panels. Nice to get all the recovery gear out of the inside. I also got my flashlight and fire extinguisher mounted to the overhead molle.

You inspired me to finally get my TrailRax Milwaukee Packout plate mounted. It's cool. Easy on off for boxes and I can still strap a dry bag or other gear to it.
NOTE: If you want to play around with different mounting scenarios, either don't use an nut runner or put anti-seize on the fastener threads. I galled/seize two of the stainless fasteners and stripped the carriage bolt square in the aluminum.

 

[Hammerli22]

You inspired me to finally get my TrailRax Milwaukee Packout plate mounted. It's cool. Easy on off for boxes and I can still strap a dry bag or other gear to it.
NOTE: If you want to play around with different mounting scenarios, either don't use an nut runner or put anti-seize on the fastener threads. I galled/seize two of the stainless fasteners and stripped the carriage bolt square in the aluminum.

Which overhead Molle are those?

 

[jsoa]

updated theme on my 24 per this thread https://www.bronco6g.com/forum/threads/how-to-update-sync-to-my-2025-style-theme-graphics.126202/

Sponsored