What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Rockledge]

Finally Lifted on Pro Comp coilovers, Pro Comp Upper control arms, JKS max kit, rear track bar bracket and Hankook DynaPro Xt 37-12.50-17 on stock wheels. From the ground to fender is 42inch front ,42.75 rear. I do have a 1 inch body kit. FYI - I now have 7.5 inch above the tire to the metal of the fender front and 8 inch rear. I had to cut an 1 and a half off of the front of the stock running boards.

Sponsored

 

[mjp2]

Just about to start my weekend project..

 

[EvilJim1971]

Rear seat delete, V1.0.

 

[TheKim]

Took the Bronco camping this past weekend at Fall Creek Falls State Park in Tennessee.

That looks like an amazing time!
Great looking trailer as well!

Thank you for sharing

 

[CarmeloS]

My friends daughter turned them pink the other night, actually like how they look

 

[mjp2]

Just about to start my weekend project..

I really can't describe just how happy I am to be installing the Lobo Offroad crash bar delete and brace kit. My truck's never had a mounted winch but the bumper nut plates still look like they were ready to fail.

Crazy that those plates are flat and flush from the factory.

Today I got the Lobo kit installed and the winch physically mounted but the sun set before I had a chance to wrap up or grab any as-it-stands-now pics. Tomorrow is wiring, trimming the bumper plastic, reinstalling the grill, and mounting JCR prerunner style bumper hoop.

Reinstalling the grill unfortunately requires removal of the winch. I probably should have read some directions or watched a video before jumping into this. Ah well, still nice to make progress.

Now you see it:

Now you don't:

It's a really good looking, stout kit. I ground smooth all the rough edges from the cut, painted it, and coated the whole area with rust prevention because I need this truck to outlast the payments.

I'll have this project wrapped up tomorrow.

 

[mjp2]

My friends daughter turned them pink the other night, actually like how they look

I'm digging the lights with those shackles.

 

[tock13]

Got gas. Made it down the mountain and almost coasted into Costco on fumes. I never go much below half tank so seeing the “get gas” warning when it hit 50 miles left was kinda concerning but I made it.

FWIW-For anyone thinking about it…don’t move to WA state unless you enjoy bending over and taking it from the taxman. Just heard we beat Cali for most expensive gas…again. I feel so proud.

 

[GPPBronco]

Was in Grand Rapids for work three days until Friday. Drove to Silver Lake Sand Dunes Friday afternoon. No action shots because I never take the time for and/or forget. I always say I’ll do better this time. But as you can see - just some pics after the Bronco was all cleaned up.

 

[mjp2]

I really can't describe just how happy I am to be installing the Lobo Offroad crash bar delete and brace kit. My truck's never had a mounted winch but the bumper nut plates still look like they were ready to fail.

Crazy that those plates are flat and flush from the factory.

Today I got the Lobo kit installed and the winch physically mounted but the sun set before I had a chance to wrap up or grab any as-it-stands-now pics. Tomorrow is wiring, trimming the bumper plastic, reinstalling the grill, and mounting JCR prerunner style bumper hoop.

Reinstalling the grill unfortunately requires removal of the winch. I probably should have read some directions or watched a video before jumping into this. Ah well, still nice to make progress.

Now you see it:

Now you don't:

It's a really good looking, stout kit. I ground smooth all the rough edges from the cut, painted it, and coated the whole area with rust prevention because I need this truck to outlast the payments.

I'll have this project wrapped up tomorrow.

And done. Looks good for used parts I picked up off marketplace. (Thanks @Jerseybraptor !!) I gave everything 2 coats of Rustoleum truck bed coating and it matches pretty darn well.

I still have to do an initial pull before I put this to work. I've had the winch itself forever but only recently swapped out the wire rope for synthetic.

It was a fun little weekend outside

 

[cynicalrider]

And done. Looks good for used parts I picked up off marketplace. (Thanks @Jerseybraptor !!) I gave everything 2 coats of Rustoleum truck bed coating and it matches pretty darn well.

I still have to do an initial pull before I put this to work. I've had the winch itself forever but only recently swapped out the wire rope for synthetic.

It was a fun little weekend outside

We had great weather for it this weekend too! Looks good!

 

[CarmeloS]

I'm digging the lights with those shackles.

Ty

 

[cynicalrider]

Took my kid and pup out to the pines to cut trail for my enduro club.

Untitled by MJH Creations, on Flickr

Untitled by MJH Creations, on Flickr

 

[Footer]

Took my kid and pup out to the pines to cut trail for my enduro club.

Didn't think they let you cut down trees in the Barrens. Nice they let you throw down an enduro trail.

 

[CarGuy]

Took my kid and pup out to the pines to cut trail for my enduro club.

Untitled by MJH Creations, on Flickr

Untitled by MJH Creations, on Flickr

What GSP exit do you use to start the rides?

Sponsored