Bronco exclusive multi-function mobile phone holder (supports fast charging) by AIGMUX

[buzpro]

1. Non-destructive installation with the original handle screws
2. Power is taken from the fuse box in the car (hidden wiring)
3. Fast charging drive with insurance (safety)
4. The bottom bracket is an aluminum alloy casting. Beautiful and atmospheric.
5. Two 1/4 interfaces are convenient for the expansion of multiple brackets.

New product launch: 5 discount spots available
Reply "I need it"

I've lost 2 phones by placing them high and near the window .... 3rd time is the charm ..... NO THANKS.

Sponsored

 

[Bruno]

I would buy the mount part that bolts onto the handle nuts.
From that I would love to see a bar that travels up the A-Pillar you could add a variety of things to like compases and clocks . Most of the systems are way too over engineered with way too much mechanism. even this one could be simplified by 80%

 

[TheKim]

I figure my 12 inch screen in the middle of my Bronco isn't enough for some reason, so let me put my phone directly in my field of view.

I don't need it. I know, I didn't need to comment and I'm a jerk for not just ignoring the thread, but I'm also a judgemental asshole

 

[29AGAIN]

To help you understand what I a referring to, please go to my content dated 20 May 2023 for a post I put up with pictures
In that instance, I recommended using an iOttie phone holder because it uses a standard 17mm ball and socket attachment. The AMPS adapter provides the 17mm ball on a short post and the iOttie phone mount has a 17mm socket to capture the ball.
IOttie, just to use an example, has several MagSafe phone mounts. Pick the latest and greatest MagSafe charger with the cheapest vent/windshield/dashboard and use the just the phone mount portion and s…t can the rest.

17mm ball and 25mm ball seem to be some sort of common device mounting industry standards.

Do your due diligence on ball and socket sizes BEFORE purchasing.

I’m not trying to sell you anything, just offering some of my experiences to help you solve your problems.

Ciao, bro

 

[Murg]

I've lost 2 phones by placing them high and near the window .... 3rd time is the charm ..... NO THANKS.

that’s like the first thing I thought when I saw these mount locations in general. It’s going to go right out the window. I’ll just hit it with my hand and whoopppsss.

 

[ssypien]

I need it

 

[AIGMUX]

Can we get one for the passenger side? I have a mount i like but nothing I have found is foe the passenger

The passenger side will block your view.

 

[murrman]

Can anyone tell me what size ball this mount uses? I'd like to change out the actual phone holder part if possible.

 

[AIGMUX]

Can anyone tell me what size ball this mount uses? I'd like to change out the actual phone holder part if possible.

The bracket reserves two 1/4 inch threaded holes

 

[thenewjs]

My luck my phone will fly out the window on 270.

 

[AIGMUX]

My luck my phone will fly out the window on 270.

Therefore, we strongly recommend the traditional hand-grab type that we have chosen now, because the suction force of the magnetic suction is uncertain.

 

[JediMcMuffin]

The bracket reserves two 1/4 inch threaded holes

What is the width of the ball? 1" or 20mm?

 

[ONEBronco]

Need it only if it has mag safe charging

I am assuming you don't run Android auto or Carplay.

 

[ONEBronco]

I figure my 12 inch screen in the middle of my Bronco isn't enough for some reason, so let me put my phone directly in my field of view.

I don't need it. I know, I didn't need to comment and I'm a jerk for not just ignoring the thread, but I'm also a judgemental asshole

It's handy for wireless trailer brake control access.

 

[TheKim]

It's handy for wireless trailer brake control access.

That's fair - I do use the Curt wireless brake controller as well, and once in a while like to manually use the trailer brake.

Sponsored