Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts.

[IwannaGOfast]

here you go. keep in mind this was designed for a specific wheel (Method MR318) and may not fit another application without modification.

I started looking through this thread to see what people have come up with and there are lots of great ideas in here.

This is what I came up with for my spare. Not as clean of setup as yours, but got the job done.
https://www.bronco6g.com/forum/threads/covered-the-void-around-camera.79597/

I'm going to have to get my brother in law to print me out one of yours. Actually there are a few things I found in this thread that I want.

Sponsored

 

[mlugb6ro]

Has anyone found a door handle storage stl file?

 

[KABQ]

Has anyone found a door handle storage stl file?

Like, for storing your door handles? I keep mine safely on my doors.

 

[mjcutri]

Has anyone found a door handle storage stl file?

For $20, I would just get the Mabett inserts...
https://www.amazon.com/gp/product/B0BRHW3R8P

 

[mlugb6ro]

For $20, I would just get the Mabett inserts...
https://www.amazon.com/gp/product/B0BRHW3R8P

But I'm looking for things to print with my new toy.

 

[Seven714]

Of course

 

[dstrus]

New Bronco owner here, but not new to 3D printing or CAD. I've only had my Wildtrak for a week, but I'm already seeing things I'll be drawing up and printing. I work in Fusion360 and I'll gladly post my work as it comes out, I just don't want people taking it and profiting from my contributions to the community.

I'm currently working on a center console tray (under arm rest) that has key holder, coin tray, and divided organizer. I have a 2 year old and a wife, so I have to split my design time between family, life and one of my other 15,000 hobbies!

I'll try to keep people posted on my work. I'm kinda OCD and won't stop until it's perfect, so I'm slower than most!

 

[Squatch]

New Bronco owner here, but not new to 3D printing or CAD. I've only had my Wildtrak for a week, but I'm already seeing things I'll be drawing up and printing. I work in Fusion360 and I'll gladly post my work as it comes out, I just don't want people taking it and profiting from my contributions to the community.

I'm currently working on a center console tray (under arm rest) that has key holder, coin tray, and divided organizer. I have a 2 year old and a wife, so I have to split my design time between family, life and one of my other 15,000 hobbies!

I'll try to keep people posted on my work. I'm kinda OCD and won't stop until it's perfect, so I'm slower than most!

Welcome! I look forward to seeing your creations.

Probably best to post it to thingiverse or printables, to get the right license associated with it, and just put the link here.

Unfortunately, when a file is out in the universe there are bad actors who will never attribute and try to sell it. Get familiar with DMCA takedowns and keep an eye out for your worksbeing misused.

Anything you really think is marketable, I would suggest you print yourself or work with one 3D printing person/company and just sell the end product.

You could also put your name/mark in the model and just post/DM STL files to make it harder to ripoff your designs, but nothing is perfect.

I don't want to discourage anyone from sharing cool 3D printed stuff for the Bronco, but these are inherent risks in the 3D printing world.

Like you, I have 15,000 hobbies or so. I have some 3D Bronco projects in the works that I thing everyone could benefit from and I'll gladly post those, some have taken so much effort that I won't post the files, and (probably the majority) some projects that only interest me and it would be pointless to post those files.

Currently, my biggest hurdle is time to design. I printed a blank plug for the 12v/USB in the rear of the center console and intended to use that to make variations like a 110v socket or more USB-C sockets... just abandoned.

 

[JoshFisk3]

I think many of us have dogs who like to step on the goat mode dial and change the drive mode or goat mode. This cover is pretty simple and uses double sided sticky tape and a paper clip as a hinge. Fits the auto not sure on the manual.

https://cults3d.com/en/3d-model/gadget/bronco-goat-dial-cover-joshfisk3

 

[TeocaliMG]

I think many of us have dogs who like to step on the goat mode dial and change the drive mode or goat mode. This cover is pretty simple and uses double sided sticky tape and a paper clip as a hinge. Fits the auto not sure on the manual.

https://cults3d.com/en/3d-model/gadget/bronco-goat-dial-cover-joshfisk3

I like it, now you need to make the cover clear, and paint the dial Red to make it look very serious! lol

 

[Bschurr]

I like it, now you need to make the cover clear, and paint the dial Red to make it look very serious! lol

LOL
BTW - the Braptor has a red (well actually Code Orange) dial

 

[darchetti]

A couple of additions
Lug plugs
I made 2 sizes, 1 for my Raptor M10 lugs & Heritage (and all others) M12 lugs

Covers for the soft top clamps in the cargo area:

very clean. where can one find or purchase the STL for Covers for the soft top clamps in the cargo area:

 

[swooshdave]

here you go. keep in mind this was designed for a specific wheel (Method MR318) and may not fit another application without modification.

I believe all the Method wheels use the same center caps. This is on the printer now with the CF plate. Should turn out sexy if it doesn't lift will printing.

 

[Bschurr]

very clean. where can one find or purchase the STL for Covers for the soft top clamps in the cargo area:

Thank you. Feel free to shoot me a PM with your contact details

 

[Squatch]

I believe all the Method wheels use the same center caps. This is on the printer now with the CF plate. Should turn out sexy if it doesn't lift will printing.

I printed one for my Methods and it fell in as a nearly perfect fit, so I believe there are different sizes. It fit around the camera shaft perfectly.
I have Method 305s.

Sponsored