Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts.

[swamp2]

it snaps in like the stock Method center cap:

Very cool. Unfortunately my KMCs have a smooth bore so clips won't work I'll have to come up with something else.

Sponsored

 

[hey_mikey_]

Very cool. Unfortunately my KMCs have a smooth bore so clips won't work I'll have to come up with something else.

which KMC wheels do you have? shouldn't be too hard to use the existing center cap as a template and design one for the spare that works with the camera. this was probably about a ten minute project, if that, from taking measurements to creating the CAD and sending it off to print.

 

[swamp2]

which KMC wheels do you have? shouldn't be too hard to use the existing center cap as a template and design one for the spare that works with the camera. this was probably about a ten minute project, if that, from taking measurements to creating the CAD and sending it off to print.

The center cap design on my Desert Grenades kind of sucks. They mount directly to the flat face around the lug holes with 3 small bolts.

Before I design such a cover plate, I'm going to design and print some custom aluminum center caps. Running naked now.

 

[beetle]

Some hooks I designed for the cargo area roll cage. Link here to the files.

• M8 x 1.25 screws x 25mm long (picked some up at Lowes)
• Hook "ledge" is 44mm (almost 1.75 freedom units)
• Designed to print laying on the side to keep layer lines in optimal orientation for strength.
• The recess on the back that you can see in the CAD pic is to accommodate for the flange of the nutsert so it sits flush with the cage.

I bought something similar, they work really well.

 

[DangerJohnson]

I made a remix to another post here on the forums.

Rear camera mount in the rollbar, added the logo to fill the empty space

Original, credit @savante21: https://www.thingiverse.com/thing:6654032

Remix: https://www.thingiverse.com/thing:6757264

 

[Arob_2]

I get a lot from here.

https://www.etsy.com/shop/Speedlogix?dd_referrer=https://www.google.com/

 

[Brandon Miller]

For those with aftermarket wheels who want to replace the basic hub cap with something that fits the OEM Bronco logo:

I am working on a variety of designs but here are a couple examples.

Here is the original for example:

My First Design:

Here is a more radical "retro" design. I kind of love it but also really like the more normal "star" design, not to mention it wont require removal to take the wheel off (not a huge deal)

Here are side views with each of my designs. One "deep dish" (back right). And three star designs, one taller, one flatter, and one more boxy (back left)

I doubt these are plug and play with other aftermarket wheels but the logic is the same, if you got calipers and CAD you can whip them up easily! I can share details about how I designed the hub interface.

Can I get the file? I need hubcaps, factory hub centric hole diameter...

 

[TeocaliMG]

Can I get the file? I need hubcaps, factory hub centric hole diameter...

For these exact wheels? Or another Black Rhino wheel with the exact same 3 bolt pattern? Some Black Rhinos are different. Just want to make sure beforehand. PM and we can check details.

 

[Seven714]

A couple of additions
Lug plugs
I made 2 sizes, 1 for my Raptor M10 lugs & Heritage (and all others) M12 lugs

Covers for the soft top clamps in the cargo area:

Do you have the STL ?

 

[Bschurr]

Do you have the STL ?

Of course

 

[BlazinGrizz]

here you go. keep in mind this was designed for a specific wheel (Method MR318) and may not fit another application without modification.

Thanks for posting this!! Printed one for my Method 705s and it fits like a glove. Nicely done. Thanks for sharing.

 

[Squatch]

it snaps in like the stock Method center cap:

I'll check which style of Methods I have, but I printed it and it just fell right in... pause for laughter... but it's dark and I'll get my spare cap and compare in the daylight.


Looks good, though

 

[DarthLincoln]

Looks good, though

How did you print that and get a textured surface?

 

[Squatch]

How did you print that and get a textured surface?

Textured PEI and that part was on the bottom.

 

[DarthLincoln]

Textured PEI and that part was on the bottom.

ah cool! I didn’t know those existed. I’ll have to get one. I’ve got a Creality K1C printer.

Sponsored