New Product Release: Fuse Box Cover with Wire Pass-Through

[IAG Off-Road]

My issue:

I added an “add-a-fuse” for my ARB compressor per Ford Performance instructions. It runs to the switch instead of taking up another AUX switch. But the add-a-fuse prevents the new lid from closing just like the factory lid. It’s not the wire, it’s the actual fuse head. How did others resolve this?

Some add-a-fuse holders are just slightly taller than others, so you may be able to find a slightly lower-profile one. Also, if possible, you want to use a fuse near the screw on cover as it is slightly taller in that area. The reverse camera fuse is the one we generally use for ignition signal and clears in that location.

Sponsored

 

[Iceman62]

Didn't know this existed, until I searched...thanks for the product. I have two added taps and was concerned w/ the pinched wiring. Accy install videos make it look so easy (just re-install cover, right), but I'm pushing/pinching quite a bit to get the cover to latch. Ended up cutting notches.

Placed order last night - can't wait...much appreciated IAG.

 

[Iceman62]

Received the cover today (fast) - pretty solid stuff and two silicone seals for the access port. I give it a thumbs-up!

 

[Nick72]

Some add-a-fuse holders are just slightly taller than others, so you may be able to find a slightly lower-profile one. Also, if possible, you want to use a fuse near the screw on cover as it is slightly taller in that area. The reverse camera fuse is the one we generally use for ignition signal and clears in that location.

IAG, does this fit the 2025 model year?

 

[IAG Off-Road]

IAG, does this fit the 2025 model year?

We have not personally tested on a 2025. However, the OEM Ford part number for the fusebox cover is the same for 2025 as 2021-2024, so it should absolutely work without issue.

Sponsored