Sponsored
What did you do TO / WITH your Bronco today? 👨🏻🔧🧰🚿🛠
After moving to 37s, I didn’t want the TBL in my view, so I wired up a Rigid chase light, eventually I’ll hook it up for chase, reverse and backup for now it’s just a brake light.
- First Name
- redneck
- Joined
- Jan 3, 2020
- Threads
- 25
- Messages
- 5,450
- Reaction score
- 17,305
- Location
- Central PA
- Vehicle(s)
- 88 5.0 LX, 08 F-150 Stepside, 22 Expl Timberline
- Your Bronco Model
- Base
Took the Beartooth Pass to Cooke City and had Lunch.
I was scrolling through FB and I came across a pic that looked familiar
I just had too remember where I saw it.
- First Name
- M
- Joined
- Aug 21, 2020
- Threads
- 26
- Messages
- 992
- Reaction score
- 3,551
- Location
- Lisbon, Portugal / Pittsburgh, PA
- Vehicle(s)
- 2023 Bronco HE
- Your Bronco Model
- Heritage
I wish that I had known about this sooner. That is an easy drive for me.Have the winch, soft top, off road gear and frame rails on. Now checking to see how the 2 door works on the trailer purchased for the longer/heavier 4 door--then some Colorado front range wheeling this week.
Love all the 5G representation.
Sponsored
Installed suma mirrors (blue + blis), loving them so far, they weren't the easiest thing to install. Pulling out the mirrors I felt like they were going to break.
When I pulled out the driver side, all the plugs can off as well, panic mode set in thinking I broke blis since the plug was still connected to the mirror and the wires can out. Luckily the wires went back in to the plug smoothly and felt snug.
It did take some adjusting to get the right angle that felt right, especially on the driver side. Here is a short video of the driver side (roughly eye level)
Time will tell if the driver side blis wires come lose
When I pulled out the driver side, all the plugs can off as well, panic mode set in thinking I broke blis since the plug was still connected to the mirror and the wires can out. Luckily the wires went back in to the plug smoothly and felt snug.
It did take some adjusting to get the right angle that felt right, especially on the driver side. Here is a short video of the driver side (roughly eye level)
Time will tell if the driver side blis wires come lose
- First Name
- Brian
- Joined
- Aug 16, 2023
- Threads
- 1
- Messages
- 74
- Reaction score
- 218
- Location
- New Jersey
- Vehicle(s)
- ‘24 Big Bend, ‘20 mustang GT, MT-82
- Your Bronco Model
- Big Bend
Swapped out the bucking bronc center caps
- Joined
- Jul 16, 2020
- Threads
- 49
- Messages
- 301
- Reaction score
- 252
- Location
- Pacific NW
- Vehicle(s)
- 2019 Mustang Bullitt, 2023 Bronco Heritage Edition
- Your Bronco Model
- Undecided
Love the custom rear camera mount! I am hoping to install a second Garmin Mini 2 for the rear and was wondering if you had any more of these custom mounts? Ii would be of course happy to pay you for the mount and for any shipping costs. Alternatively, if this was done with a 3D printer, would you be willing to share the file with me?Completed my Dashcam install by finally adding a battery under the driver seat for parking mode and using a custom 3D printed bracket for the rear camera mount and blendmount for the front.
Waiting on my fridge slide to arrive. I've been planning out where to keep my power station. I'm not a fan of it taking up such valuable real estate.
Sponsored
- First Name
- Ken
- Joined
- Aug 12, 2020
- Threads
- 44
- Messages
- 9,521
- Reaction score
- 31,336
- Location
- St. Augustine, FL
- Vehicle(s)
- 2023 Outerbanks Bronco
- Your Bronco Model
- Outer Banks
Think a singular MOLLE panel over the passenger window and a bracket to mount the Bluetti would work? @GlueBoy sells a singular panel.
Waiting on my fridge slide to arrive. I've been planning out where to keep my power station. I'm not a fan of it taking up such valuable real estate.
- Joined
- Dec 6, 2022
- Threads
- 19
- Messages
- 197
- Reaction score
- 650
- Location
- Arizona
- Website
- gluefactoryoffroad.com
- Vehicle(s)
- 21 Bronco
- Your Bronco Model
- Badlands
I don’t know which model that is exactly, but looking at the AC70 unit that’s around 23 lbs. There’s no real clean way to safely mount it just with our molle panel without fabbing an additional bracket like beach bum said. You’d need a tray and some additional support gussets to account for the moment with it sticking so far out. You’d have better support with a rear cargo basket that mounts across the cargo area as it’s elevated.
Sure. I feel like it could have used a bit more refinement but it worked for me and I’m only using PLA+. Hasn’t had any issues yet from heat. Probably because it mounts on multiple sides
Give it a look here I just uploaded it a few days ago :
https://www.thingiverse.com/thing:6654032
- Joined
- Jul 16, 2020
- Threads
- 49
- Messages
- 301
- Reaction score
- 252
- Location
- Pacific NW
- Vehicle(s)
- 2019 Mustang Bullitt, 2023 Bronco Heritage Edition
- Your Bronco Model
- Undecided
Thank you so much! Really appreciate it!
- First Name
- John
- Joined
- Aug 13, 2020
- Threads
- 24
- Messages
- 2,572
- Reaction score
- 5,026
- Location
- Westchester County, NY
- Website
- teachu2shoot.com
- Vehicle(s)
- M-B GLE53 AMG, Ducati XDiavel, Jeep WK GC x3
- Your Bronco Model
- Raptor
Took the furball out for a a topless cruise with the modified tube door to protect him a bit more...he's strapped in but he likes to ride with one arm out the window so I had to raise the height of the tube door since it is even lower than the actual door. Pretty happy with how it turned out.
Sponsored
