What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[wilbersk]

Well did not do this today, but I guess I can post about it now. Running the IAG AOS system on Jesabelle. Works great and you do not have to empty it. Works in the same way as my GT500 system, so it just some added peace of mind.

Does it drain the oil back in to circulation?

Sponsored

 

[Dialtone]

Installed the SSV rear speaker kit. They've been covered here by others who word it better than I can. Went with the SSV speakers as the Bronco isn't really an audiophile head space. Really nice kit. Easy install. The only minor nit to pick was the wiring covers. Not a very positive fit. Good but not OCD satisfying. Definitely a worthwhile purchase.

 

[Arokcrwlr]

Does it drain the oil back in to circulation?

Correct. There is a hose that goes from the separator to a fitting on a new oil fill tube IAG supplies.

 

[Ninjak]

Does it drain the oil back in to circulation?

What @Arokcrwlr said. It's actually a pretty nifty system. Well made, well constructed. I was impressed with the quality.

 

[Callelk]

Installed the ASFIR transmission and T-Case skid plates today after doing an engine, front diff and T-Case oil change. Fit is perfect but I do wish the hardware was S/S. Will probably change it all out to S/S as time goes on.

I have the fuel tank skid plates but with me closer to 70 than 60 and having a driveway with an 11% grade, I'll wait until my son comes home on his vacation this summer to give me a hand.

 

[BeerRunner]

That is a MUCH better angle on the back glass. Very nice!

I think so too. Only gripe amongst so many positives is the hardware. Philips heads screws on exterior rear glass and interior while also hex heads near by.. probably an earlier adopter thing, but only noticed by an owner, but hard to unsee.

Bonus is the interior headliner is great for Velcro patch’s

 

[BeerRunner]

Stamping off more South Carolina Parks in the passbook .

 

[Acadist]

Ordered using some of my points

Plan to use more of my points to finally have my Procal installed. Took a while but I finally found a local dealer that is willing to install

 

[604Bronco]

Mickey Thompson Baja Boss A/T - 35x12.5R17LT (From Mickey Thompson):

So today I had installed a set of Mickey Thompson Baja Boss A/T tires, in a 35x12.5R17LT (Load Range D).

I'm coming from the OEM Goodyear 315/70R17, and am using the OEM Sasquatch wheels.

It's only been an hour or two since having them installed, however I already love them!

It's currently raining very heavily here, and wet road traction was a big important factor for me. These tires grip the road really well, and even when I floored it from a complete stop and took a corner, there was no slipping. I also took them over some very pot-hole riddled roads, and the Bronco felt more cushioned with these tires vs. the OEM Goodyears, where you felt every bump. These tires also appear to be quieter than the OEM Goodyears (I could be wrong, but they seem quieter to me), and they look awesome! Much more aggressive looking.

If you have any questions, please let me know. I definitely recommend these tires and the early experience with them has been positive.

Sorry, the pictures aren't great as it's pouring rain right now.

OEM Goodyears:

Mickey Thompsons:

Comparison between the two:

 

[dvnorton]

Installed a bucking horse that my son made for me on his 3D printer. Bucking the opposite way of the logo (couldn't find an STL file that looked like the Bronco logo). Per other advice on the forum, used a 1/4"-20 tripod screw and a 1/4" wood insert (similar to this, but I got mine from the assorted parts drawers at the hardware store) that I screwed into the bottom of the horse. Painted it with a purple-blue reflective paint that changes color as you change your viewing angle.

Note that Bronco Buddies has a smaller horse that looks like the logo and installs into dash mount.

[Cross-posted to the 3D Printing thread]

 

[dvnorton]

Switched back to the (Bestop) soft top today. Us New Englanders have to wait a bit longer than the rest of you . Also added the Mabett Fuse Box Cover, and the Mabett Roll Bar Covers. The installation of the roll bar covers wasn't quite as simple as the instructions said...if you have the speaker pods, you have to remove the lower bolt and loosen the upper bolts to get the inside piece in place.

 

[BadsquatchNV]

Off road maiden voyage. Lagomarsino Petroglyphs and Old Geiger Grade OHV Trail (Toll Road) in High Desert of N NV.

360 camera views while wheeling in the mud ruts and rock crawling modes is like cheating. It is such a cool feature.

Also first oil change and multipoint inspection. 0W-30.

 

[BadsquatchNV]

 

[Beach_Bum]

Went to the dealer to see about the Ford Pass issue showing the bronco in Dearborn... no luck there, but the parts gal, an acquaintance of ours, had a new coffee mug for.my wife... she's had one like it and my wife commented every time we saw her, so she ordered one for my wife! Color matching...

Please tell me you are getting a moar door. Looks more like a Chonco instead of a Bronco.

Sponsored