Show us your installed wheel / tire upgrades here! (Pics)

[gaaangs]

22 Big Bend, non-sas, stock suspension. I had been running the BD steelies with 285/70/17 Falken WP At3's, but just upgrade to the RTR Evos at 30mm offset. Install was this morning, and it's looks even better in person! I think I'll need to clean up these tires tomorrow haha!

This may be a dumb question, but can you do an "off-set" with normal stock wheels tires? I thought you could only do off-set if you did bigger wheels/tires?

Anyway, I have a stock badlands (non sas) but want the wheels to poke out a bit more to improve its stance. Is this possible? Or would I need to do wheel spacers instead?

Sponsored

 

[bkfit]

21 Basesquatch 37x12.5 toyo Open country AT3 on Blk Rhino Rapids 17, -18 offset.

 

[mattymik]

This may be a dumb question, but can you do an "off-set" with normal stock wheels tires? I thought you could only do off-set if you did bigger wheels/tires?

Anyway, I have a stock badlands (non sas) but want the wheels to poke out a bit more to improve its stance. Is this possible? Or would I need to do wheel spacers instead?

What you’re describing can really only come from a wheel spacer, which makes your wheel effectively a more negative offset.

A fatter tire can provide more poke, too, but only by half the added width of the tire.

I think stock Badlands tires are 10.5” width, so switching to a 12.5” width tire would provide an extra 1” of “poke” approximately. But I don’t think that will give the look you’re looking for.

 

[drewburns998]

This may be a dumb question, but can you do an "off-set" with normal stock wheels tires? I thought you could only do off-set if you did bigger wheels/tires?

Anyway, I have a stock badlands (non sas) but want the wheels to poke out a bit more to improve its stance. Is this possible? Or would I need to do wheel spacers instead?

FWIW, I'm not an expert so I'm happy to be corrected here . Offset is a wheel-specific thing, so obviously that depends on the wheel you use. To get a wider stance and simulate more offset without changing the wheels, then yea you'd likely need spacers (I don't actually know much about the impact on the ride/potential damage etc by going this route). I guess a third option would be narrower fender flares.

In any case, you also might want to consider mud flaps just to minimize the additional mud/rocks that will get thrown. Hopefully that helps!

 

[Beach_Bum]

@604Bronco Is this how it works?

 

[604Bronco]

@604Bronco Is this how it works?

 

[Discount Tire]

21 Basesquatch 37x12.5 toyo Open country AT3 on Blk Rhino Rapids 17, -18 offset.

Very rugged looking wheel and tire set up. Love the black on red, It's our favorite color combination. Great looking rig.

 

[604Bronco]

Here’s my wheel and tire setup. I made sure to zoom in so you can get a true sense of what it looks like.

 

[Broncno]

285 70 17 Mastertrack Badlands AT tires and RockTrix RT116 17x9 +12mm offset. Wheel is only 25.5lbs and tire is 45.5lbs. prices were $115 for each wheel (RockTrix.com). Each tire was $139 (Walmart) the ride is great and I didn't have spend a ton of money to get the look I wanted. I had put non sas outer banks wheels and tires when I first got it and those weighed 65 lbs so only a 6lb difference. Bronco is a big bend w/3:73 gears and a 2" level kit. It stays in 10th gear at 55 on the highway and does not struggle so I am happy with that.

 

[j_marinelli]

Here’s my wheel and tire setup. I made sure to zoom in so you can get a true sense of what it looks like.

How many units in beaver maple syrup servings away is that???

 

[HoosierDaddy]

@604Bronco Is this how it works?

 

[UniBroncorn]

Can someone please help me. I looked at online and could not find the answer.

Will a wheel with the size below added to the stock Braptor tire allow for full suspension articulation/compression/travel and no rubbing anywhere.

17 x 9"
6x135 +0

Thanks

 

[solracarevir]

Went with something different. Hope you like them cause I do!

And of course, Obligatory Costco run.

 

[james1414d]

Eibach coils + 37's

 

[broox]

@Vorsteiner VR-601BLs (17x9, 0 offset) in Tungsten Graphite with BF Goodrich KO2 315/70R17s (c-load, s-speed).

Sponsored