Looks great! Any difference in performance white w amber covers vs amber lights?2 LP6 lights here with SAE fogs and squadron pro side lights.
Where are the project lights made? Cant seem to find this info..Did someone say two round lights? I like Project X HP.70’s. At 15k lumens each with a combo beam they do the job. Did I also mention I’m doing a giveaway for a set on my YT channel?! Lol
They can be added to a stock bumper with appropriate brackets.
here is a video on a few light setups and showing em work at night. (No wall demos here).
Here is the giveaway:
So, i could use 2 of my factory aux switches ? 1 for low 1 for hi. Think i saw a harness that would tap headlights and pwr backlight. Thinking this would work on the 30s8 light bar on raptor
Yes, you will need to use two switches if you want to use high/low on the Lp6 series. Our S8 only comes with a high beam and amber backlight it does not have a high/low.
Here is the harness I used from @SPVPARTS to power the backlights.
What light did you use for chase light?"You can never have too much firepower" Billy Rose, Beverly Hills Cop II. Seconded by Heretic Studio and @KermitBronco.
We run these on 3 switches (#2, #3, #4). #1 is for white light bar above, #5 is for white ditch lights, #6 is for rear amber chase lights up high on Trailrax. Works like a charm on stock modular bumper.
On the advice of Heretic Studio, we used their Quattro in Amber (matches the inner lights upfront). Mounted them on the TrailRax rack up high for maximum effectiveness (above the dust). Easy-peasy install and I'll be at UBB if you're attending or happy to share anything.
Nice. Thanks for the quick response. I’m running Heretics as well for fog lights, ditch lights, light bar and camp lights. Wanted to tackle chase lights next up high on my Trailrax and had a hard time finding others that installed on rack. I was debating on their SA2. Man every time I see a green Bronco I second guess my gray one.On the advice of Heretic Studio, we used their Quattro in Amber (matches the inner lights upfront). Mounted them on the TrailRax rack up high for maximum effectiveness (above the dust). Easy-peasy install and I'll be at UBB if you're attending or happy to share anything.
BTW, they're turned off in this pic. They get the job done when lit.
I try to refrain from ever telling a professional how to do their job and Heretic Studio recommended the (brighter) Quattro in Amber over the SA2 for Chase Lights mounted up high so I went with those. Easy install, stellar performance.Nice. Thanks for the quick response. I’m running Heretics as well for fog lights, ditch lights, light bar and camp lights. Wanted to tackle chase lights next up high on my Trailrax and had a hard time finding others that installed on rack. I was debating on their SA2. Man every time I see a green Bronco I second guess my gray one.
