What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Blue Steel]

Installed the Thor’s Lightning dual air compressor setup.

Sponsored

 

[GLOCK10MM]

How do you like the Thor's system ? Is it equal to the ARB in your experience ? The mount system looks sweet how secure has it been ?
Thanks

 

[Blue Steel]

How do you like the Thor's system ? Is it equal to the ARB in your experience ? The mount system looks sweet how secure has it been ?
Thanks

I've owned the ARB and built my own mount for inside my FJ. Used it for years with no problem and can't say anything bad about it. I didn't have the capability to air up and down all four tires at the time when I owned the ARB. The Thor's system is a great setup. Thor’s dual compressor, mounting bracket, and hose system to inflate and deflate all four tires at the same time costs less than the ARB compressor alone. Its secure and airing up and down is fast.

 

[GLOCK10MM]

I've owned the ARB and built my own mount for inside my FJ. Used it for years with no problem and can't say anything bad about it. I didn't have the capability to air up and down all four tires at the time when I owned the ARB. The Thor's system is a great setup. Thor’s dual compressor, mounting bracket, and hose system to inflate and deflate all four tires at the same time costs less than the ARB compressor alone. Its secure and airing up and down is fast.

Excellent, thanks for the response.

 

[IwannaGOfast]

I've owned the ARB and built my own mount for inside my FJ. Used it for years with no problem and can't say anything bad about it. I didn't have the capability to air up and down all four tires at the time when I owned the ARB. The Thor's system is a great setup. Thor’s dual compressor, mounting bracket, and hose system to inflate and deflate all four tires at the same time costs less than the ARB compressor alone. Its secure and airing up and down is fast.

Is it hard wired? Or does it run on the 12v plug below?

Does the bracket/compressor need to come off in order to remove the top?

 

[Blue Steel]

Is it hard wired? Or does it run on the 12v plug below?

Does the bracket/compressor need to come off in order to remove the top?

My setup is hard wired. Yes, the bracket would need to come off to remove the top.

 

[paperboy]

My setup is hard wired. Yes, the bracket would need to come off to remove the top.

Nice job!

Curious about the specifics of your route for the hard wire. And what gage wire did you run?

Thanks!

 

[BD6G]

My awesome wife and kiddo picked me up some tube doors for Father’s Day. Got them mounted up today and went for a little cruise around.

 

[Blue Steel]

Nice job!

Curious about the specifics of your route for the hard wire. And what gage wire did you run?

Thanks!

The setup comes with the wire needed to ground to the frame and connect to the battery including an in-line fuse and switch. I routed mine under the rear seat to the driver’s side and then up to the engine area keeping the fuse as close to the battery as possible.

 

[paperboy]

The setup comes with the wire needed to ground to the frame and connect to the battery including an in-line fuse and switch. I routed mine under the rear seat to the driver’s side and then up to the engine area keeping the fuse as close to the battery as possible.

Thanks!

I assume you went through the firewall on the vehicle. I have been wondering if anyone has gone underneath the vehicle and against the frame on the outside and then up through the floor?

 

[Blue Steel]

Thanks!

I assume you went through the firewall on the vehicle. I have been wondering if anyone has gone underneath the vehicle and against the frame on the outside and then up through the floor?

That is definitely an option.

 

[PrepVet]

I made the mistake of putting in some of my information into the Ford website for a new Bronco since I am just past the half way point on my lease. I know what my buy out is and what I might want different if I got a new one... ie the high package with the larger screen and maybe SAS it. Well that sent the info to the nearest dealer. The same shitty one I bought my current one from. They have been hitting me up hard with calls and emails about how "it's Bronco Days!" and they really want to get me into a new Bronco and how excited they are to offer me "$13,000 sight unseen!" for my 10k miled Bronco. They even included my VIN and everything. This is a few thousand less that the cold mailer they sent me a few months ago offering to buying it. I really do not think they have any idea what the hell they are doing.

 

[Golfsnob]

When through the Chick Fil A drive through today. Seemed like a long time waiting for my order. Guy finally comes up and ask me "what's the name on the order?" Kid that took my inline order listed my Bronco as a gray coupe. Older guy was trying to locate the gray coupe. Said that was the 1st 2 door he had seen.

 

[MannyG20]

When through the Chick Fil A drive through today. Seemed like a long time waiting for my order. Guy finally comes up and ask me "what's the name on the order?" Kid that took my inline order listed my Bronco as a gray coupe. Older guy was trying to locate the gray coupe. Said that was the 1st 2 door he had seen.

I mean the kid’s not wrong

 

[Ninjak]

I installed the Spartan Grab Handles for the front to see how I would like them. I grew weary of the paracord dangle down when I went to get in, even though they matched my orange trim

I actually like em. A lot. I was afraid about getting in and out, but all it takes is to reach in, grip it, and I am on the rail no issues. Also, they are up above the airbag, so I can actually reach up and hold onto them if I want to. I'll the order the back ones now.

Sponsored