Accessory Rail & Applicable Mounts For Dashboard - recommendations?

[Chisox0508]

So I was looking for a quality rail to place on my dash. Anybody have any recommendations? I found this one by IAG (https://www.iagperformance.com/iag-i-line-full-length-dash-mount-rail-system-2021-ford-bronco) that seems cool, but I also was looking for what type of Mount I needed to get to fit the rail. For both a phone, a GoPro, and other attachments that I may need in the future.

Also if you have a better rail, please link it, I’d like to check it out!

Sponsored

 

[coadr]

Tough to beat the one @EIGHTLUG is putting out. Expensive but incredibly high quality product, loved mine since the day it arrived.

https://archetyperacing.com/products/ar-bam-byodr

 

[Chisox0508]

Tough to beat the one @EIGHTLUG is putting out. Expensive but incredibly high quality product, loved mine since the day it arrived.

https://archetyperacing.com/products/ar-bam-byodr

I do remember seeing this brand now that you mention it. Now what about the Mount for the phone. I haven’t used a picatinny type rail before, would I need a screw in Mount, or something to clip on there?

 

[Losy]

I went with 67 Designs phone holder. Like it a lot with the carbon fiber arm. well made and does not budge. Also the rail from AR is nice and does not require any drilling. They now make a little bit smaller one that I would suggest checking out. I added a picantinny screw holder for a gopro from Amazon. i get a lot of compliments on this set up. The rail adds a lot of interest to the dash.

 

[RC Bronco]

Also using 67 Designs arm/Mount and waiting for my AR BYODR to ship

 

[iamcris]

So I was looking for a quality rail to place on my dash. Anybody have any recommendations? I found this one by IAG (https://www.iagperformance.com/iag-i-line-full-length-dash-mount-rail-system-2021-ford-bronco) that seems cool, but I also was looking for what type of Mount I needed to get to fit the rail. For both a phone, a GoPro, and other attachments that I may need in the future.

Also if you have a better rail, please link it, I’d like to check it out!

I have one of the @EIGHTLUG AR BAM BYODR (Badlands) . Love mine and it will last as long as my Bronco. It's definitely future proof.

 

[22BlackDiamondGreen]

I went with 67 Designs phone holder. Like it a lot with the carbon fiber arm. well made and does not budge. Also the rail from AR is nice and does not require any drilling. They now make a little bit smaller one that I would suggest checking out. I added a picantinny screw holder for a gopro from Amazon. i get a lot of compliments on this set up. The rail adds a lot of interest to the dash.

I've been looking for this style Phone Holder for my rail -- Can you provide a link please?

 

[helifino16]

This provides a lot of mounting options - only $9 on Amazon once you've picked out a BYOD bar.

 

[Chisox0508]

I went with 67 Designs phone holder. Like it a lot with the carbon fiber arm. well made and does not budge. Also the rail from AR is nice and does not require any drilling. They now make a little bit smaller one that I would suggest checking out. I added a picantinny screw holder for a gopro from Amazon. i get a lot of compliments on this set up. The rail adds a lot of interest to the dash.

I like the 67 Design full rail but I wanted to get one that didn’t require drilling. I may buy some of their mounts to use though because they look like they should be compatible with other rails.
I’d like a charging MagSafe mount, but i wonder how it’d hold up on the trail.

 

[WheresMyBronco]

So I was looking for a quality rail to place on my dash. Anybody have any recommendations? I found this one by IAG (https://www.iagperformance.com/iag-i-line-full-length-dash-mount-rail-system-2021-ford-bronco) that seems cool, but I also was looking for what type of Mount I needed to get to fit the rail. For both a phone, a GoPro, and other attachments that I may need in the future.

Also if you have a better rail, please link it, I’d like to check it out!

Just as an FYI, that IAG rail seems to be the same one as the ones on Amazon by Mabett, Xipex, etc but those are available for $40ish instead. I got one off Amazon and I really like the quality of it, so if you do decide to get one I'd save some cash and get it from there too

 

[wanna1]

I use the 67 Designs and AR BYOD rail also. Love them!
67 Designs

 

[Blaven]

Check this thread out if you have a 3d printer or know someone who does. Cost me about $25 for materials for my buddy to make. I put a picatinny rail on it for my camera.

Thread 'My Homemade Mini Accessory Rail for 2021 Bronco Dash (3D Printed)' https://www.bronco6g.com/forum/thre...y-rail-for-2021-bronco-dash-3d-printed.25984/

 

[8cam]

I’m using 67 Designs carbon fiber arms (I have two), with their MagSafe mount for my phone. I’ve got an AR SLAP on order which will expand my options with the arms.

 

[B Miller]

If on a budget, here's an option.

Mabett Dash Rail Amazon

Here's another:

 

[Dom]

Get this and go to pages 90 and up and you can find all the suggestions you need to make it do what ever you want..... https://www.bronco6g.com/forum/thre...num-modular-bring-your-own-device-rail.23369/

Sponsored