Show me your broncos on 37’s…

[broncoj11]

What lift kits are you guys using to clear 37’s properly? Specifically those with Sasquatch broncos

Sponsored

 

[Mdsuits]

What offset are you running, and which tires are those? Can't quite tell from the pics? Looks great!

17x9 -38mm 37 bfg km3s. Thanks.

 

[Jonny way]

Related question...What is the overall height of your car with the 37-in tires?
My work garage is 6ft-9in height limited and want to be sure I'm making a good decision.
My car is still on order, but I see that a SAS Badlands is 6ft-3in tall.

 

[Destination Bigfoot Bronc]

What lift kits are you guys using to clear 37’s properly? Specifically those with Sasquatch broncos

1.5" broncbuster body lift and stage 8 Icon coilover kit

 

[Bird Dog Off Road]

 

[Felix808]

Hey Bird Dog, What rear bumper / tire carrier set is that? I ended up ordering the Expedition One bumper / tire carrier. It's currently being built.

 

[SevenT]

The BronkDozer on 37s.

 

[Bird Dog Off Road]

Hey Bird Dog, What rear bumper / tire carrier set is that? I ended up ordering the Expedition One bumper / tire carrier currently being built.

It is the ADD Stealth fighter bumper. I do have some buyers remorse due the huge gap between the bumper and the body. Was not aware of that or I would have went with something else.

 

[cmb396]

17x9 -38mm 37 bfg km3s. Thanks.

Gotcha. Big fan of the KM3, although they run on the small side. Had 37's on my JTR, and now have 39's, but they only measure 37.5". I believe my 37's measured right around 35.25" underload.

 

[Felix808]

It is the ADD Stealth fighter bumper. I do have some buyers remorse due the huge gap between the bumper and the body. Was not aware of that or I would have went with something else.

Bummer on the buyers remorse. From your picture it looked like the tire carrier was part of the bumper, but it just looks like a swing gate reinforcement.

 

[Bird Dog Off Road]

Bummer on the buyers remorse. From your picture it looked like the tire carrier was part of the bumper, but it just looks like a swing gate reinforcement.

Correct. I have the Hammer built reinforcement unit.

 

[Slick85]

If I have non-sas 2.3 would I need to re-gear it?

 

[Bmadda]

Homemade 2" body lift, 1.4" borne spacers, 1" level. Trimming in the usual spots!

 

[Mdsuits]

Gotcha. Big fan of the KM3, although they run on the small side. Had 37's on my JTR, and now have 39's, but they only measure 37.5". I believe my 37's measured right around 35.25" underload.

Yeah bfgs always run smaller than most tires of the same size. Even the red labels. Here is a 39 red mounted up….way to big to run with no lift of course.

 

[Mdsuits]

Related question...What is the overall height of your car with the 37-in tires?
My work garage is 6ft-9in height limited and want to be sure I'm making a good decision.
My car is still on order, but I see that a SAS Badlands is 6ft-3in tall.

Mine is in between 6’4” and 6’5” but I have no extra lift.

Sponsored