The most important switches are the 1st, 2nd, and 4th.what is the correct way to run the dip switches
Sponsored
The most important switches are the 1st, 2nd, and 4th.what is the correct way to run the dip switches
You kept the OEM 6.5s or did you replace those as well? Thanks for sharing your experience.Just installed pnp kit 11-4 and wanted to share my experience. 11-4 is the kicker key 200.4 harness and 17’ speaker leads for adding a sub later. I had already replaced the four 4”s with infinity reference which made a huge improvement, but I still wanted a little more volume. I ordered an open box of the 200.4 amp from best buy for $230. Plugged it all in and the amp wouldn’t turn on, so I got a new one at my local Best Buy for the open box price. I plugged it in before I drove home and was getting sound.
I ran the calibration program with dip switches in the default down position. PRO TIP: DO NOT DO THAT. It had less bass than without the amp because “bi-amp” switch was set to on. That made it crossover the fronts so much that all the bass was gone. I ran the calibration again after setting the dip switches correctly and it now sounds awesome. I may not even get a sub now because the amp drives the 6.5’s really well.
I kept the OEM 6.5”s because I’ve read that replacing them doesn’t improve bass and in some cases reduces it.You kept the OEM 6.5s or did you replace those as well? Thanks for sharing your experience.
That’s only if you don’t have the kicker 200.4. Stock head unit won’t drive hardly any 6.5 upgrades. They kicker will do just fine.I kept the OEM 6.5”s because I’ve read that replacing them doesn’t improve bass and in some cases reduces it.
Just as FYI: I had a very good experience replacing OEM with Morel Maximo Coax 6 without an amp (yet) that goes down to 55HZ (not sure of really) and 91 dB.That’s only if you don’t have the kicker 200.4. Stock head unit won’t drive hardly any 6.5 upgrades. They kicker will do just fine.
Good to know! I went with a memphis 6.5 woofer. Sounds great with the kicker amp driving it.Just as FYI: I had a very good experience replacing OEM with Morel Maximo Coax 6 without an amp (yet) that goes down to 55HZ (not sure of really) and 91 dB.
It can shake some plastics over setting 15.
https://www.crutchfield.com/S-jlwfV...Cpu6BjVhQehh0Dod0_7ioklMcV_pQtIhoCk2kQAvD_BwE
I’m interested to know how much of a difference new 6.5s would make with the amp. I’m surprised how good the OEM sound now. Not earth-shaking low lows, but much more on par with premium audio from luxury car brands.That’s only if you don’t have the kicker 200.4. Stock head unit won’t drive hardly any 6.5 upgrades. They kicker will do just fine.
Ya the kick panels speakers are the best stock speakers in the bronco for sure. I’m not sure they can handle 50 watts rms from an amp for very long though. Crutchfield recommended I upgrade when I added the amplifier so I did.I’m interested to know how much of a difference new 6.5s would make with the amp. I’m surprised how good the OEM sound now. Not earth-shaking low lows, but much more on par with premium audio from luxury car brands.
Okay....I have this picture (or one like it) multiple times and still can't make heads or tails of the settings! Do they slide up/down or do they press in/out? What are the "good" settings?The most important switches are the 1st, 2nd, and 4th.
![]()
They click into up or down position. The picture shows down, up, down, up, up, up, up, up.Okay....I have this picture (or one like it) multiple times and still can't make heads or tails of the settings! Do they slide up/down or do they press in/out? What are the "good" settings?
thats the code for contraThey click into up or down position. The picture shows down, up, down, up, up, up, up, up.
Thanks!!!!They click into up or down position. The picture shows down, up, down, up, up, up, up, up.
would you mind linking the memphis 6.5 you installed?Good to know! I went with a memphis 6.5 woofer. Sounds great with the kicker amp driving it.
Sure thing. https://www.crutchfield.com/p_953MJP6/Memphis-Audio-MJP6.htmlwould you mind linking the memphis 6.5 you installed?