Finally Frame Mounted Sliders from LOD OFFROAD!!!

[Frankie945]

I noticed that couple weeks ago about the pinch seam being photoshopped in their photos. I got some Wurth under coating spray to blackout the seam before the install. I watched a few jk videos with people installing them to get a better idea on how they’d look and most of guys used vinyl wrap to cover the seam.

Sponsored

 

[LOD Offroad]

I noticed that couple weeks ago about the pinch seam being photoshopped in their photos. I got some Wurth under coating spray to blackout the seam before the install. I watched a few jk videos with people installing them to get a better idea on how they’d look and most of guys used vinyl wrap to cover the seam.

The owner of our Bronco had tried vinyl to cover the pinch seam. I would recommend something more permanent like a rocker guard coating. The vinyl was not holding up well.

 

[Frankie945]

The owner of our Bronco had tried vinyl to cover the pinch seam. I would recommend something more permanent like a rocker guard coating. The vinyl was not holding up well.

No worries I picked up a can of Wurth High Build UnderBody UnderSeal. Same stuff a few others on here have used to cover the seam and they said they had great results with it. Looking forward to getting the sliders.

 

[cjindna]

LoD’s install instructions include the use of a spacer around the trailing arm mounts and recommend not using the spacer if you have trailing arm skids. Are you concerned that won’t work? Spacer too small compared to typical trailing arm skids?

No concerns with fitting a skid under however there were several ledge pivots where I would have hung up on the channel protruding out and away vertically from the arm mount. Certainly something that can easily be cut off but also an easy redesign of the mounting point.

 

[kevin.gt]

@LOD Offroad what’s the weight of the signature sliders?

 

[LOD Offroad]

@LOD Offroad what’s the weight of the signature sliders?

I think they are around 160 for the pair.

 

[kevin.gt]

I think they are around 160 for the pair.

Thanks. And the destroyers are about 100 lbs a pair?

 

[LOD Offroad]

Thanks. And the destroyers are about 100 lbs a pair?

Destroyers are about 140 for the pair.
Armor Lites are 110 for the pair.

 

[Badassbronco]

Submitted for free rails

 

[kevin.gt]

@LOD Offroad do you have an eta for first signature shipments?

 

[LOD Offroad]

Going to powder coat later this week so should be shipping sometime next week.

 

[Wraithracing]

Going to powder coat later this week so should be shipping sometime next week.

Would there be some Destroyers going to powder coat too . . . . .

 

[LOD Offroad]

Would there be some Destroyers going to powder coat too . . . . .

Maybe, but more likely early next week to powder.

 

[LOD Offroad]

In case anyone forgot, dont forget to send us some pics of you and your Bronco (4dr)! Our slider giveaway will be closing soon!

 

[Wraithracing]

Maybe, but more likely early next week to powder.

Thanks for the update. Waiting impatiently for my Destroyers!

Sponsored