Kicker Key Amp 200.4 Install DIY Video - Do this first!

[Darren13]

Which kit to just add a jbl powered sub? I think it’s kit #6. Thanks!

Sponsored

 

[KeithK]

Which kit to just add a jbl powered sub? I think it’s kit #6. Thanks!

Well it depends. What are you adding it to? That kit is for a line converter.

 

[Darren13]

Just want to add this powered subwoofer.

 

[Darren13]

I probably need the lci2 don’t I?

 

[Darren13]

Maybe kit #4?

 

[Darren13]

Just checked and the sub has high level inputs so kit 6 should work. I think.

 

[Mariposap75]

Correct, It was "Kit 11":
https://plugnplaykits.com/products/...y-audio-harnesses-kits?variant=41130698473662

I really don't have a parts list. Kit 11 comes with the Kicker Key 200.4 amp and plug n play harness. The only other part I used was a scrap of HDPE plastic that I had laying around. That was what I screwed the amp to and then screwed the plastic to the dashboard support.

Are they the only ones that carry this plug n play harness?

 

[KeithK]

Just checked and the sub has high level inputs so kit 6 should work. I think.

Give the tech number on the website a call, talk to Joe and describe your set up (amps, lci,etc) and he will guide you to the right kit.

 

[Kyrioslol]

Hi everyone! Its my first post here as i await for my Bronco to finish its matte ppf which i recieve on Sunday im looking to upgrade the sound system first thing!

I got 2 Kicker csc4s and 1 csc65. Kicker 200 amp including harness from plug and play along with a hideaway 10in sub. Am i all set with this setup ?

Thanks in advance!

 

[jh3113]

The best place is the back of the metal bar under the steering wheel.

What hardware did you use?

 

[KeithK]

Hi everyone! Its my first post here as i await for my Bronco to finish its matte ppf which i recieve on Sunday im looking to upgrade the sound system first thing!

I got 2 Kicker csc4s and 1 csc65. Kicker 200 amp including harness from plug and play along with a hideaway 10in sub. Am i all set with this setup ?

Thanks in advance!

Should be. Consider boom mats for the 4” dash speakers, dynamat behind the 6” and rear speakers and if you prefer bass blockers for the dash speakers. I’ve read though the DSP on the amp may adjust for that.

 

[SoCalG]

Should be. Consider boom mats for the 4” dash speakers, dynamat behind the 6” and rear speakers and if you prefer bass blockers for the dash speakers. I’ve read though the DSP on the amp may adjust for that.

Since the front dash speakers are wired in parallel with the 6 1/2" speakers, there isn't a way for DSP technology to remove the lower bass notes for the 4" speakers without removing them for the 6 1/2" speakers. Bass blockers are recommended. The factory dash speakers come with a built in 400 hz filter. So something close would make a difference in balancing the sound.

 

[KeithK]

Since the front dash speakers are wired in parallel with the 6 1/2" speakers, there isn't a way for DSP technology to remove the lower bass notes for the 4" speakers without removing them for the 6 1/2" speakers. Bass blockers are recommended. The factory dash speakers come with a built in 400 hz filter. So something close would make a difference in balancing the sound.

Good point and recommendation.

 

[Synyster06Gates]

Damn I wish this was in stock. I’m doing all my speakers as soon as the bronco comes in and would like to throw this in too

 

[67BroncoG1]

Are they the only ones that carry this plug n play harness?

Correct. They make it and sell it directly to the consumer. You might want to call because I found that his online inventory isn't always up to date.

Sponsored