New Lamps

[4x4TruckLEDs.com]

I just finished installing my Fog Pocket and Rear Bumper lamps from 4x4TruckLEDs. Went with Baja Designs across the board. The harnesses and brackets from 4x4TruckLEDs made the install pretty easy -- even with temperatures in the 20Fs. No, I don't work for 4x4TruckLEDs, nor am I affiliated with them except being a customer. Right now I'm controlling each of the fog lamps with independent switches. A fourth upfitter switch for the rear. Both pair of Squadrons in the front fog kit are SAE/street legal. S2 Sports are not. I haven't connected the rear lamps to the factory backups yet (wired 'or' with diode)... not sure I want to, but it's an easy tweak if I decide to do it.

Looks great! Thanks for the business.

Sponsored

 

[Diode Dynamics]

I dig the rear bumper lights. Been thinking about red ones for bad weather, and down low like that should work nicely.... wondering @Diode Dynamics has something. Haven't really searched it out....and easy to mount and wire for us non-mechanicals....would be nice to just add into fog lamps wired to the Aux switch together...

We do offer a Flush Mount Kit for the rear bumper with a red running light that comes with a full fused and relayed harness. However, it is not bolt-on like the on in the above images.

 

[scojosmac]

You are getting whatever you pick. We let YOU, the customer, choose what lights YOU want. It's part of our "Build Your Own Kit" system we call it. You get the brackets, harness, instructions and then you get to choose 3 different lights in whatever pattern/light output you want. We go over, on our site, the various options and some recommendations as well:

https://www.4x4truckleds.com/baja-d...-w-kr-off-road-brackets-for-2021-ford-bronco/

Really wish your bracket was like BDs

 

[nd2002]

I've been wondering if there is a good marine grade/underhood junction block for the upfitter wires. Seems it would be good to have.

Look into Deutsch connectors, specifically the ones made for 10-14ga wire. That’s how I’ve set up the engine bay with the pocket kit I have. Very well made and easy to add/change wiring.

 

[4x4TruckLEDs.com]

Really wish your bracket was like BDs

We're working on one. I have the prototype (made from stainless steel) arriving to me Monday for fitment. But it looks like this (this is a 3D model I printed)

Here is a photo with Diode Dynamics (grin). We designed them to work with both Baja and Diode Dynamics

 

[Headsong]

We do offer a Flush Mount Kit for the rear bumper with a red running light that comes with a full fused and relayed harness. However, it is not bolt-on like the on in the above images.

Great, just one more thing I want. That looks way cool! Thx, Adam.

 

[JohnnyX]

Look into Deutsch connectors, specifically the ones made for 10-14ga wire. That’s how I’ve set up the engine bay with the pocket kit I have. Very well made and easy to add/change wiring.

Do they have a terminal block set up, or just connectors. If just connectors, how easy is it to move pins around in the connector? My experience is that once a crimped pin is in the connector shell, it's not going to come out without damaging it.

 

[scojosmac]

We're working on one. I have the prototype (made from stainless steel) arriving to me Monday for fitment. But it looks like this (this is a 3D model I printed)

Here is a photo with Diode Dynamics (grin). We designed them to work with both Baja and Diode Dynamics

thats amazing new. Nice work, Adam. Rough time to being ready to sell/deliver?

 

[4x4TruckLEDs.com]

thats amazing new. Nice work, Adam. Rough time to being ready to sell/deliver?

Probably 3-4 weeks if the Prototypes fit

 

[nd2002]

Do they have a terminal block set up, or just connectors.

It's sort of a hybrid, I suppose? Certainly not a block, but you can have a single connector support multiple hookups. For e.g. I have 2 lights connected to 2 aux switches using a single connector. You can choose 2, 4, 6, 8, 10, 12 pin connectors (depending on the wire gauge, different options available)

If just connectors, how easy is it to move pins around in the connector? My experience is that once a crimped pin is in the connector shell, it's not going to come out without damaging it.

This is where I feel this connector shines. The pins themselves, and the crimping strength and quality is VERY high (though requires a separate tool), and the connector is designed for the crimped pins to be reconfigured as needed within the connector or even to a different connector.

There are many videos on YT that show you the full process like this

 

[Diode Dynamics]

We're working on one. I have the prototype (made from stainless steel) arriving to me Monday for fitment. But it looks like this (this is a 3D model I printed)

Here is a photo with Diode Dynamics (grin). We designed them to work with both Baja and Diode Dynamics

Looks awesome!

 

[4x4TruckLEDs.com]

Looks awesome!

Here's the protype made from stainless (need to redesign it a bit)

BUT making progress!

 

[imaginager]

Here's the protype made from stainless (need to redesign it a bit)

BUT making progress!

Mostly unrelated question: I see BD offers Lens Kits for the S2 (and others). Can an S2 Wide Cornering Amber be converted with a Lens Kit to be non-amber and in any pattern? I'm thinking, specifically, for transitioning between seasonal driving. It's not foggy in the summer, typically, so it would be nice to be able to switch my fog light to a spot, or driving/combo.

 

[4x4TruckLEDs.com]

Mostly unrelated question: I see BD offers Lens Kits for the S2 (and others). Can an S2 Wide Cornering Amber be converted with a Lens Kit to be non-amber and in any pattern? I'm thinking, specifically, for transitioning between seasonal driving. It's not foggy in the summer, typically, so it would be nice to be able to switch my fog light to a spot, or driving/combo.

Yes. Bajas lights are all white, so you can put any lens you want (clear or amber) in any pattern you want at any time. They call it "U-Service"

We stock all the lenses: https://www.4x4truckleds.com/led-au...igns/lighting-accessories/replacement-lenses/

 

[Natai]

No, I haven't. Inner lamp is 1 (Amber SAE), middle is 2 (White SAE), outer lamp (White Sport S2) is 3. The rears are on 4. It's pretty easy to move them around if I want or need to. I've been wondering if there is a good marine grade/underhood junction block for the upfitter wires. Seems it would be good to have.

I've spent a few hours this week looking for the same thing, without much success.
I'm leaning towards getting this 6-circuit 30A Blue Sea Systems terminal block and a weatherproof box that fits.
https://www.amazon.com/dp/B000277JA...t_i_H3WFTZBFYMPKGD8BBV3F?_encoding=UTF8&psc=1

Sponsored