Where to get Ford Licensed Bronco Cursive Script Metal Emblem Kit

[Stevenson James]

Hey All -

I purchased this bronco metal black chrome emblem kit back in june from @StickerFab , https://www.stickerfab.com/products...emblem-kit-2021-bronco?variant=44429243220287

In december my parked bronco was hit and the body shop ended up replacing the bumper, grill and the fender. They got all the after market stuff except this emblem replaced also. Stickerfab apparently is sold out at the moment.
Are there any other vendors that sell this exact accessory? I still have the passenger side emblem from stickerfab, so i want to get another pair that matches what i have already. I dont want to install two new ones, unless i have to.
I need to make the purchase sooner rather than later, so i can submit the receipt to my insurance company. Any help would be appreciated.

EDIT : I think I found the same badges from @Underground Graphics or at least the measurements are exactly the same...
https://www.undergroundgraphics.com...emblems-vintage-design?variant=44133926273263

Sponsored

 

[Ducati1098]

Ford sells one. I don’t know if it’s the exact same, but worth looking into or asking @StickerFab if this is the licensed one they use.
The part number is M-1447-BSGS

Edit: Nvm, pretty sure it’s not the same one. But this one is according to stickerfab’s website:
https://www.dennis-carpenter.com/bronco/body/fenders/c6tz-16098-bch-fender-emblem-black-chrome

 

[Stevenson James]

Ford sells one. I don’t know if it’s the exact same, but worth looking into or asking @StickerFab if this is the licensed one they use.
The part number is M-1447-BSGS

Edit: Nvm, pretty sure it’s not the same one. But this one is according to stickerfab’s website:
https://www.dennis-carpenter.com/bronco/body/fenders/c6tz-16098-bch-fender-emblem-black-chrome

Good find. Pretty good price too.
I found a pair that matched the sticker fab measurements at underground graphics as well.

 

[Lowcountry Bronco]

Matte black:

https://www.ford.com/product/2021-2...ript-fender-badge-kit-matte-black-p2909353922

Silver:

https://www.ford.com/product/20212025-bronco-script-emblem-kit-silver-p2823891764

15% Off Accessories Purchase up to $1,000*
For registered customers. Use code REDEEM125. Offer valid 01/03/25 – 02/10/25.

 

[Stevenson James]

Matte black:

https://www.ford.com/product/2021-2...ript-fender-badge-kit-matte-black-p2909353922

Silver:

https://www.ford.com/product/20212025-bronco-script-emblem-kit-silver-p2823891764

15% Off Accessories Purchase up to $1,000*
For registered customers. Use code REDEEM125. Offer valid 01/03/25 – 02/10/25.

They dont have the black chrome option, and i dont think they are the same.
The stickerfab/underground graphics ones were originally for retro broncos... and on the underground graphics site they have this note :

Dimensions: Approximately 10.5 inches wide and 2.25 inches tall. They outsize the 6th Gen Heritage badges by 1.5 inches!​

​

No measurements on the fod site, but assuming those are smaller based on the note above.

 

[Lowcountry Bronco]

They dont have the black chrome option, and i dont think they are the same.
The stickerfab/underground graphics ones were originally for retro broncos... and on the underground graphics site they have this note :

Dimensions: Approximately 10.5 inches wide and 2.25 inches tall. They outsize the 6th Gen Heritage badges by 1.5 inches!​

​

No measurements on the fod site, but assuming those are smaller based on the note above.

Yep, they used the ones for the EB and removed the pins so I guess Dennis Carpenter above is a good choice and you'll have to remove them yourself.

You have CJ Pony parts too, both of those guys are old school EB part houses.

https://www.cjponyparts.com/fender-emblem-black-chrome-bronco/p/EMF131/

The Ford accessory part is only a tad smaller than the original script, but missed the black chrome part.

 

[TequilaTom]

Thinking replacing my Black Diamond badge with the “OEM” “Bronco” script emblem meant for the Heritage.

Is this (link below) that?

Is it metal? Any comments on the l size difference versus the classic ones. Any other thoughts or comments appreciated!

https://www.lethalperformance.com/f...m-kit-silver-2021-2024-bronco-m-1447-bss.html

 

[Stevenson James]

Thinking replacing my Black Diamond badge with the “OEM” “Bronco” script emblem meant for the Heritage.

Is this (link below) that?

Is it metal? Any comments on the l size difference versus the classic ones. Any other thoughts or comments appreciated!

https://www.lethalperformance.com/f...m-kit-silver-2021-2024-bronco-m-1447-bss.html

The one you link to appears to be the metal version. But I’m not too familiar with that vendor and I don’t see the dimensions.

There are large metal scripts that a lot of folks, including myself, use that come in chrome or black chrome. They originally had pegs for installation on classic broncos but were filed off and adhesive backing was added.
I think the OEM metal ones could be a little smaller. I’d check dimensions.

 

[TequilaTom]

The one you link to appears to be the metal version. But I’m not too familiar with that vendor and I don’t see the dimensions.

There are large metal scripts that a lot of folks, including myself, use that come in chrome or black chrome. They originally had pegs for installation on classic broncos but were filed off and adhesive backing was added.
I think the OEM metal ones could be a little smaller. I’d check dimensions.

Ahh I see. It looks like these ones, right?

https://www.dennis-carpenter.com/bronco/body/fenders/c6tz-16098-bch-fender-emblem-black-chrome

They are available in black chrome, and I guess I have to pull off metal nuon the back. Wondering if they look too big on a modern Bronco 2 Door versus the Heritage size which is slightly smaller.

Also, I wanted the chrome originally but my Bronco has a lot of black exterior trim so the black chrome might look better. So much to think about

 

[Stevenson James]

Ahh I see. It looks like these ones, right?

https://www.dennis-carpenter.com/bronco/body/fenders/c6tz-16098-bch-fender-emblem-black-chrome

They are available in black chrome, and I guess I have to pull off metal nuon the back. Wondering if they look too big on a modern Bronco 2 Door versus the Heritage size which is slightly smaller.

Also, I wanted the chrome originally but my Bronco has a lot of black exterior trim so the black chrome might look better. So much to think about

I have a carbon gray bronco 4-door and the black chrome script. I got mine from both underground graphics and stickerfab. They already had the mounting pegs filed off and the adhesive added. They also came with application templates. Not sure what the dennis carpenter installation process will be like but the prices are pretty good there.

 

[StarrBronco]

https://www.ebay.com/itm/356745219222

 

[VAtruck]

The later block Bronco lettering emblem was my first thought when I saw the six hole BB/OB grille. I'm going to pull off a couple next time I go to the bone yard.

Sponsored