Where do I drill

[nipeej]

I need to run a Cat5 cable from my radio control on the dash to the main unit on the passenger side console. Where can I drill on the dash to run this cable?
Any help would be appreciated. Rick

Sponsored

 

[Copperhorse73]

That whole area underneath is hollow if u don’t have the lux package speaker there. I’ve done several USB hub installs, I usually just drill in the middle

 

[Ed Morris]

If you want to see what you're doing before you drill, I'd suggest unscrewing the accessory mount panel and prying out the hero switch panel. You'll then be able to shine a flashlight under the tray you're drilling into to verify you aren't going to hit anything.

 

[Kyukidoeric]

I loosened the top So I could see the underside, then hand drilled it with a tapered hole bit. It cut easy by hand. There isn't to much to getbin the way, but it was hard to feed the wires.

I need to run a Cat5 cable from my radio control on the dash to the main unit on the passenger side console. Where can I drill on the dash to run this cable?
Any help would be appreciated. Rick

Sponsored