Well we bought this thing

[Gallopin]

I guess this should be an intro since I haven't posted yet but not a noob so I skipped it. We have been wheeling in the fam since the old school CORVA and Baker 2 Vegas days including Jeepspeed. Coming out of a highly built Jeep (which we still have many in the barn) i decided to jump into a Bronco, mainly because the Daughter persuaded it. We did alot of home work and decided to order one with all the specs we wanted. At 1st we were stuck on a Wild but chose the Badlands sasquatch with H3.0. We knew we wouldn't be crazy whaling but we wouldn't be fire road mall crawling. We knew the ability we wanted and 1st dropped in a Ket of Kings on all 4 corners (not lifted). We added Rock Jock end links and rack support sleeves. We couldn't find a shop that produces good looking bumpers yet like a stubby (cough GenRight) so we thought the best looking was the 4wP high clearance. I gotta say the sensor install it 1 of thee best ive ever seen and work flawlessly!. We covered the crash bar tusks with DV8s covers but found out the light lads do not work with the OE metal bumper, chopped them off. We literally never carry a spare (plug kit and OBA) so we did DV8s delete and added the front hoop for lights to come. We added Rigid pods to the fog pockets on aux 1 and 2 and they are perfect for road light. Because we live in Gabins state we needed a front plate so we did DV8s detachable kit and it didn't block the sensors at all. We found these interior handles on amazonnn unfortunately made in chin but they are stout as heck. We just ordered the GOAT hood decal from Ford because we do get glare so why not a OE GOAT one. We fish quite a bit so my kid bought me these rear seat back covers from amzn and the are awesome velcro is crazy attached (goose gear delete soon) We were going to add ADZ UCAs but found no need for what we needed, ROCKRUNNER, and the OE UCAs do not break. Did the Baxter kit with a wix and full Amsiol with ProLube to luber her up. Obvious more mods to come tune, CAI, maybe AFE pipe (hate the way 6clys sound with pipes but meh maybe). Slapped some Reika wheels and 35s RT Trails and loving it. Anyways heres a couple a pics hope yall enjoy Ask any questions if need be. Have a good weekend Broncytonk Fam.

Sponsored

 

[javelina]

Wow, very nice rig! enjoy!

 

[Sherpa11]

nice work! does that front hoop block the camera pretty badly? I assume it's dv8's also or it looks like it.

 

[Gallopin]

Not at all. Yes its DV8

 

[Sherpa11]

thanks, appreciate it!

 

[userdude]

Checkout StinkyFab:

https://www.stinkyfab.com/collections/bronco-parts

 

[PetePerkins]

Looks great! About that rear bumper, I believe it's Smitty Built. Is there any wiggle room to raise it about 3/4 inch? For example, if you had a 3/4" body lift, which leaves a gap between the bumper and body. I downloaded the install directions for your bumper but can't see if this is possible or not. OEM rear bumper has no vertical adjustment. Looking for a good looking rear bumper that has a little height adjustment.

 

[Gallopin]

Looks great! About that rear bumper, I believe it's Smitty Built. Is there any wiggle room to raise it about 3/4 inch? For example, if you had a 3/4" body lift, which leaves a gap between the bumper and body. I downloaded the install directions for your bumper but can't see if this is possible or not. OEM rear bumper has no vertical adjustment. Looking for a good looking rear bumper that has a little height adjustment.

No there isn't. The recovery rings sit in the frame end pockets and the bumper slides into them so it's flush. However you could fab a filler piece out of metal os rubber that would work.

Yes at this time SB was bought out by 4WP so it was created by 4wp. If you search it hits more on 4wp but yes its smitty

 

[Gallopin]

Looks great! About that rear bumper, I believe it's Smitty Built. Is there any wiggle room to raise it about 3/4 inch? For example, if you had a 3/4" body lift, which leaves a gap between the bumper and body. I downloaded the install directions for your bumper but can't see if this is possible or not. OEM rear bumper has no vertical adjustment. Looking for a good looking rear bumper that has a little height adjustment.

Checkout StinkyFab:

https://www.stinkyfab.com/collections/bronco-parts

Stinky makes some good stuff. I wasn't going for what we built but I couldn't find a fab shop that make bare bones. We were going to buy Stinky and chop off the sides but than we would need a front. So we went with the OE look. This 4wp rear honestly is very clean and high tuck.

 

[PetePerkins]

Stinky makes some good stuff. I wasn't going for what we built but I couldn't find a fab shop that make bare bones. We were going to buy Stinky and chop off the sides but than we would need a front. So we went with the OE look. This 4wp rear honestly is very clean and high tuck.

I agree, that's one of the best looking rear bumpers that I've seen. Clean looking.

 

[Valhalla]

With your rear tire delete, is the rear camera positioned wrong? I modified the same mount for that reason.

 

[Gallopin]

So the old DV8 yes it was position wrong. The new which (you have v1) its correct. It has a 1/8th or so in side offset but it still sits correctly. Ones who gripe about camera perfection will gripe. I dont worry about parking on a dime.

 

[THE_SAVSQCH]

I guess this should be an intro since I haven't posted yet but not a noob so I skipped it. We have been wheeling in the fam since the old school CORVA and Baker 2 Vegas days including Jeepspeed. Coming out of a highly built Jeep (which we still have many in the barn) i decided to jump into a Bronco, mainly because the Daughter persuaded it. We did alot of home work and decided to order one with all the specs we wanted. At 1st we were stuck on a Wild but chose the Badlands sasquatch with H3.0. We knew we wouldn't be crazy whaling but we wouldn't be fire road mall crawling. We knew the ability we wanted and 1st dropped in a Ket of Kings on all 4 corners (not lifted). We added Rock Jock end links and rack support sleeves. We couldn't find a shop that produces good looking bumpers yet like a stubby (cough GenRight) so we thought the best looking was the 4wP high clearance. I gotta say the sensor install it 1 of thee best ive ever seen and work flawlessly!. We covered the crash bar tusks with DV8s covers but found out the light lads do not work with the OE metal bumper, chopped them off. We literally never carry a spare (plug kit and OBA) so we did DV8s delete and added the front hoop for lights to come. We added Rigid pods to the fog pockets on aux 1 and 2 and they are perfect for road light. Because we live in Gabins state we needed a front plate so we did DV8s detachable kit and it didn't block the sensors at all. We found these interior handles on amazonnn unfortunately made in chin but they are stout as heck. We just ordered the GOAT hood decal from Ford because we do get glare so why not a OE GOAT one. We fish quite a bit so my kid bought me these rear seat back covers from amzn and the are awesome velcro is crazy attached (goose gear delete soon) We were going to add ADZ UCAs but found no need for what we needed, ROCKRUNNER, and the OE UCAs do not break. Did the Baxter kit with a wix and full Amsiol with ProLube to luber her up. Obvious more mods to come tune, CAI, maybe AFE pipe (hate the way 6clys sound with pipes but meh maybe). Slapped some Reika wheels and 35s RT Trails and loving it. Anyways heres a couple a pics hope yall enjoy Ask any questions if need be. Have a good weekend Broncytonk Fam.

Looks awesome. Congrats!

Don’t forget to wave!

 

[Gallopin]

Looks awesome. Congrats!

Don’t forget to wave!

Forgive us if we dont and I hate those ducks. My Son uses them for shooting targets.

 

[THE_SAVSQCH]

Forgive us if we dont and I hate those ducks. My Son uses them for shooting targets.

lol! Sweet rude man. Enjoy. I’m the forum joker but I’m harmless. You have sweet ride enjoy it.

Sponsored