To keep or not keep is the question. (decal)

[crzyhawk]

It was pretty easy to get my Big Bend stickers off. I used a heat gun though I am not certain I needed it

Sponsored

 

[helifino16]

How hard was it to pull the Badlands sticker off. I have an OBX and want to pull them off but I’m afraid of pulling the paint. I was thinking if I parked it in the sun it would warm the adhesive and make it easier to pull. I want to replace it with block script BRONCO.

They come off pretty easily. I just picked at a corner with my fingernail and slowly peeled it away. There was a video online from TC Customs in Atlanta showing just how easy this was.
Leaving in the Sun for a bit is a good idea - a heat gun or even hair dryer (she will love that!) will also do the trick. Go slow, be patient. You may even be able to relocate it elsewhere - kind of an easter egg for others to find. Mine went on the Tailgate (inside) and under the top of the Center Console Cover. There's a little triangle indention on the body (near the rocker panel) just inside the door - it may fit there also.

 

[Xterra2Bronco]

Mine is completely naked. Took the gaudy sticker off the fender and never replaced it with anything. Looks cleaner.

 

[not on the rug]

Strip them all off immediately. What is the Bronco community's obsession with gaudy decals and stickers?

 

[20Bronco21]

How hard was it to pull the Badlands sticker off. I have an OBX and want to pull them off but I’m afraid of pulling the paint. I was thinking if I parked it in the sun it would warm the adhesive and make it easier to pull. I want to replace it with block script BRONCO.

If they have been there a few years, yes, let it sit in the sun to warm up and pull at a diagonal. Pull easy. Clean with alcohol.

 

[AlienHunter]

If they have been there a few years, yes, let it sit in the sun to warm up and pull at a diagonal. Pull easy. Clean with alcohol.

Thanks

 

[Eldowerks]

Nice retro 2G Bronco block letter script!

They come off pretty easily. I just picked at a corner with my fingernail and slowly peeled it away.

I warmed up the badge with a heat gun and used a plastic razor blade to lift up a corner, then it pops off pretty easy and can be reused.

Agree that a badge and the 1G Bronco script is too much on the fender, so relocated the badge to the rear side window.

Sponsored