Do you mind sending the link for the fog lights in the picture or any alternatives? When I google capable bumper fog lights nothing pops up, just ones for mod bumpers.I can just about GUARANTEE that the link you sent is exactly the same one. At $600 buy it, break it down and have it all powder coated. There’s a reason it’s $600 shipped. I got my hands on a capable and added a KR off road double off road kit.
I have the capable bumper and will be going with these: https://www.4x4truckleds.com/diode-...brackets-for-2021-ford-bronco-capable-bumper/
You just need to cut off the tow hooks or buy the intercooler mounts without the tow hooks. If you are set on keeping the tow hooks, our Bronco front skid works with them.
Yes, I did complete the project. Sourced a clean Capable Bumper from a local owner for $100. He was nice enough to include the metal bash plate and support brackets which were easy to install. Purchased 4 parking sensor bezels ($50) from my Ford dealer. They were not an exact match from my plastic bumper, but i did my best to align them as I was not sure how this would affect their performance.
NICE! Do you have the “Mid” or “Lux” package? My concern is that I have the Mid package and I don’t have front parking assistance. I’m wondering if I get the sensors will I be able to activate front parking assistance?Yes, I did complete the project. Sourced a clean Capable Bumper from a local owner for $100. He was nice enough to include the metal bash plate and support brackets which were easy to install. Purchased 4 parking sensor bezels ($50) from my Ford dealer. They were not an exact match from my plastic bumper, but i did my best to align them as I was not sure how this would affect their performance.
Installation was challenging but not overly difficult. I was concerned the wiring harness from the plastic bumper was not going to be long enough but after some finagling I was able to make it fit. Drilling the holes with a cone-shaped bit worked great on both the plastic and metal surfaces. I used a dremel tool to notch out the sides for the bezels, I made it (almost) perfect.
Parking sensors work as designed.
About a 2 hour project and I'm pleased with the results. Looks so much better.
My OBX has the LUX package. Perhaps there's a Forscan option to enable the parking sensors on non equipped models? Then there's the wiring harness. I don't know.
