Sponsored
Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts.
- Thread starter I3lackRose
- Start date
- Watchers 46
- First Name
- Shad
- Joined
- Sep 5, 2020
- Threads
- 5
- Messages
- 208
- Reaction score
- 521
- Location
- San Francisco
- Vehicle(s)
- First Edition
- Your Bronco Model
- First Edition
There is a free version for personal use here:
https://www.autodesk.com/products/fusion-360/personal
You mind sending me the STL for that?Oh, I totally forgot, but I made some storage hooks for the rear, like some others. I tried to heavily radius everything to reduce stress concentration. One for the blank hole on the side of the roll bar (left), the other one to piggy back on the bolt for the bottom of the speaker (right). Never even got around to adding them to my site, but hit me up if you want the STL.
- First Name
- Dan
- Joined
- Mar 1, 2023
- Threads
- 0
- Messages
- 40
- Reaction score
- 67
- Location
- Newton, MA
- Vehicle(s)
- 2023 Bronco Badlands 7-spd
- Your Bronco Model
- Badlands
Installed a bucking horse that my son made for me on his 3D printer. Bucking the opposite way of the logo (couldn't find an STL file that looked like the Bronco logo). Per other advice on the forum, used a 1/4"-20 tripod screw and a 1/4" wood insert (similar to this, but I got mine from the assorted parts drawers at the hardware store) that I screwed into the bottom of the horse. Painted it with a purple-blue reflective paint that changes color as you change your viewing angle.
Note that Bronco Buddies has a smaller horse that looks like the logo and installs into dash mount.
[Cross-posted to What Did You Do to Your Bronco Today thread]
Note that Bronco Buddies has a smaller horse that looks like the logo and installs into dash mount.
[Cross-posted to What Did You Do to Your Bronco Today thread]
- Joined
- Jun 3, 2019
- Threads
- 18
- Messages
- 879
- Reaction score
- 2,847
- Location
- Plymouth Michigan
- Website
- www.brokeninnovation.com
- Vehicle(s)
- 2021 Bronco Badlands non-sas 4 door manual
- Your Bronco Model
- Badlands
Yea, PM me.
Sponsored
Installing overhead aux switches since I didn’t realize I’d want it when I ordered…have to replace the whole overhead console which runs around $340. Would love to have a 3D print out of just the aux switch housing. Would more than likely save me money.
I stopped tinkering with one and just got the BDUSA replacements. I think I picked them up on a sale, but they were super easy to install and it is better than a print.
If you want to make a model, the OEMs pop off easily and you can take the measurements. The diminutive size is perfect for MSLA, but it needs to be FDM to be functional. It just didn't look great to me. Post one if you find/make one.
Sponsored
