Question about my audio upgrade

[ryanc721]

I installed Trail 7's bundle. NON bNO I got 6 new speakers including the rear pods. I have an amp for the sub (jl audio) and an amp for the speakers. I set the speakers to high pass out from the amp. Problem is, the highs are REALLY high and I feel like when I disabled the high pass on the amp, it almost sounded the same. Do I need to change those pods to full out in forscan? Any tips?

Sponsored

 

[RagnarKon]

The factory comes with a EQ profile that includes a high-pass filter for the rear pods.

No idea how the Trail 7 bundle works, but I imagine they are just taking the factory signal and amplifying it without changing a thing.

If you don't want a high-pass filter, you can turn it off via Forscan. But note this will also likely remove the low-pass filter for the subwoofer. I haven't actually measured the signals from the subwoofer amp on 2025-2026, so I can't say for certain... but just from helping a few people with their upgrades, I am pretty confident there is a low-pass filter on that subwoofer from the factory.