My Stroppe Baja Bronco tribute build

[EvilJim1971]

Would be even closer to the real thing with a silver, not a white grill.

Sponsored

 

[Callelk]

Not a 100% color match, but close enough for the girls I date.
Picked up an inexpensive winch mount with hoop, as a winch carrying homage to the original Stroppe Cactus Smasher.
Did a quick rattle can job, have a slight bit of touch up where the red meets the welds.
Can't really mask that properly.

Questions, where did you get the winch plate and bar and what rattle can paint did you use? I'm having a heck of a time finding anything close to the Race Red.

 

[Callelk]

I tried to find slot rims but the offsets suck.........

 

[EvilJim1971]

Questions, where did you get the winch plate and bar and what rattle can paint did you use? I'm having a heck of a time finding anything close to the Race Red.

https://buckleupoffroad.com/product...ull-bar-for-2021-ford-bronco-w-modular-bumper
This is the primer, paint, and clear I used.

 

[EvilJim1971]

I tried to find slot rims but the offsets suck.........

Kirk Stricker with Buck n Bronco off-road had a few sets custom made with the correct offsets, I believe he still may have a few sets for sale.
https://bucknbroncooffroad.com/?fbclid=IwAR2McXfB2lzAbJOw03FBQaa6o_1I-E6b9mLej8uZdgLaWBIL-v97Py-rATk

 

[Callelk]

https://buckleupoffroad.com/product...ull-bar-for-2021-ford-bronco-w-modular-bumper
This is the primer, paint, and clear I used.

Ah, thank you!

 

[Callelk]

It will be interesting to see how difficult it is to install the winch plate on the capable bumper. But since the HE does not have a camera or sensors, it looks like you will only need to remove and replace the tow hooks. Am I correct?

 

[EvilJim1971]

It will be interesting to see how difficult it is to install the winch plate on the capable bumper. But since the HE does not have a camera or sensors, it looks like you will only need to remove and replace the tow hooks. Am I correct?

That's what it looks like, and possibly trim the plastic pieces around them.

 

[Lowcountry Bronco]

https://buckleupoffroad.com/product...ull-bar-for-2021-ford-bronco-w-modular-bumper
This is the primer, paint, and clear I used.

They're not cheap but its a correct match for RR:

https://www.automotivetouchup.com/spray-paint/spray_paint_matched.aspx

If I had to buy again I'd go your route!

@Callelk

 

[Callelk]

That's what it looks like, and possibly trim the plastic pieces around them.

Its unfortunate that there are no light tabs to the outside of the bar. Good place to mount old fashioned KC's.

 

[Callelk]

Kirk Stricker with Buck n Bronco off-road had a few sets custom made with the correct offsets, I believe he still may have a few sets for sale.
https://bucknbroncooffroad.com/?fbclid=IwAR2McXfB2lzAbJOw03FBQaa6o_1I-E6b9mLej8uZdgLaWBIL-v97Py-rATk

Ill' bet they fetch a pretty penny...I do like this tribute over the Saleen though.

 

[EvilJim1971]

They're not cheap but its a correct match for RR:

https://www.automotivetouchup.com/spray-paint/spray_paint_matched.aspx

If I had to buy again I'd go your route!

@Callelk

That 2K clear was painful to buy as a rattle can.

 

[EvilJim1971]

Ill' bet they fetch a pretty penny...I do like this tribute over the Saleen though.

Kirk's Big Oly is by far my favorite bronco tribute build.

 

[az_dirt]

Bring it to Baja

 

[EvilJim1971]

Bring it to Baja

I plan on it eventually.

Sponsored