lug nuts for aftermarket wheels?

[Aloha Sunrise]

I went with Dorman splined lug nuts. They are about 1/4 deeper than some of the other brands.

Sponsored

 

[Owl]

Thanks. I'll have to check the Dorman out... after I measure the ones I have.

 

[Deleted User 5719102]

I had to buy mine on Amazon as every parts store did not carry my size.

 

[Compta38]

Most OEM lugs are trash. If they’re the two part / capped version throw them in the garbage and get some aftermarket lugs.

I’m still waiting for my 2Door so I have no reference.

Good luck

yup, dealer wanted $200 to replace the lugs on my dd Fusion because of Ford's garbage 2 piece lugs swelling. I bought 1 piece AMERICAN made ones for like $50 and had them replaced recently when I got tires. My wife asked service manager if they used same trash lugs on Bronco and he said yes.

 

[Owl]

I see where McGard are American made, and Dorman are Chinese made. I'll opt for American made if I have a choice (and price is similar i.e. can afford American) and the quality is there.

Thanks for the input on both McGard & Dorman... I'm learning a lot here.

 

[WILDcardOD]

Mishimoto Aluminum Locking Lug Nuts, M12 X 1.5, Fits Ford Bronco 2021+

For peace of mind, i went with these, simply because i have used Mishi Lug nuts on numerous vehicles and never one issue.... a hundred bucks to me is a cheap insurance policy. Word to wise... dont let the tire places ram these on with an impact... the nuts themselves will take it like a champ, but they will Mar.

I wanted these and bought them but hate the open end and will be replacing with gorilla ones

 

[mig1980]

I got these from CJ Pony Parts (they specialize in Mustang). It was nice that they came in a kit of 27 (3 for the spare). They have other kits in Chrome, non-spline, etc. Reasonable price. I'm very happy with mine. Have had Gorilla before and they hold up very well. If you want/need locking lugs, a kit of 5 is very hard to find.

Sorry to resurface this old thread but I am looking at these Gorilla lug nuts for my new FIFTEEN52 Range HD wheels. Would these fit ok?

 

[helifino16]

Sorry to resurface this old thread but I am looking at these Gorilla lug nuts for my new FIFTEEN52 Range HD wheels. Would these fit ok?

Not sure. I still have the stock WT wheels. These are holding up great.

 

[the poacher]

Lug nuts are one application where I wouldn’t be satisfied with aluminum, but I’m glad they are working well for you.

Mishimoto also makes closed steel nuts for the bronco, and they have a good sale on them right now...

Mishimoto Steel Lug Nuts, M12x1.5, Acorn Seat, 20pc Set | Mishimoto

 

[the poacher]

Do they make these with a closed end? Do you have any photos of yours installed?

Yes they do make closed end lug nuts for the bronco, and they are only 28.00 for 24 pc set.

Mishimoto Steel Lug Nuts, M12x1.5, Acorn Seat, 20pc Set | Mishimoto

Sponsored