JcrOffroad - prototyping begins!

[JcrOffroad]

You guys going to have nay spring sales/specials? I was too far out on getting my Bronco to jump on the black friday stuff, but I'll jump on any upcoming sales for the front bull bar....

Doubtful. We are fighting skyrocketing material costs, which have caused most of our product prices to increase. On average we are 130% up over last year on steel.

Now we are fighting UPS and FedEx as they have increased pricing and added fuel charges again.

Good times.

Sponsored

 

[JcrOffroad]

Shock skid, first revision. One more revision and it should be production ready.

 

[FireBall]

Shock skid, first revision. One more revision and it should be production ready.

Can you show it from the side? From that angle, it looks like more of a hard stop.

 

[niterider006]

On the front bumper, are there any other areas where I would be able to add lighting besides the 3 inch cutouts?

 

[JcrOffroad]

Frame mounted Crusader sliders are getting close. They feature build in jacking locations and built in rock lights front and rear.

They do require some drilling and installing self threaded bolts where we are not able to pickup factory provisions. Not a hard install, we have used this style fastening for all of frame mounted sliders for over 19 years.

More to come in this as we refine them, as well as 2-door option.

 

[Mdemieville]

@JcrOffroad man you guys are killing it! I might as well throw your logo on my doors with all the stuff I'm gonna be buying from you.

 

[FootPain]

Just ordered my Vanguard front bumper. Anxiously awaiting the skids to order. Michigan made sold me instantly.

 

[deanfromkelowna]

Let me formally introduce ourselves. I’m Brian, one of the owners at JcrOffroad/Victory4x4. We are an American Offroad accessory manufacturer. This March will be our 19th year! We are based out of Portage Mi and do everything in house. Laser cutting, fabrication, powder coating etc. We have over 50 employees, 2 shifts and ship more than 2500 orders a month. Offroad parts are all we do; Jeep, Toyota, Lexus, and now Bronco. Looking forward to build our Bronco line up!

We’ve been waiting for our Broncos to get delivered. All three have arrived and now it’s time to get going on engineering!

Hi clearance front winch bumper. Few different hoop options.

Rear will be a dual swing carrier setup.

The orange boy is torn down and scanned! Let the fun begin! I’ll share updates here as we go!

What’s your website so we can follow you? Can’t wait to see what you create! D

 

[JcrOffroad]

What’s your website so we can follow you? Can’t wait to see what you create! D

www.JcrOffroad.com

 

[U725Bronco]

I'm looking forward to seeing the finished sliders. I really wish it was possible to install some legit sliders that double as a step and don't require drilling, but seems unlikely.

 

[Tilzbow]

I'm looking forward to seeing the finished sliders. I really wish it was possible to install some legit sliders that double as a step and don't require drilling, but seems unlikely.

To your point about the step it‘d be nice to know the width of the top of the @JcrOffroad slider in the picture since it’s difficult to tell based on the picture alone. It might just be wide enough to work.

 

[JcrOffroad]

To your point about the step it‘d be nice to know the width of the top of the @JcrOffroad slider in the picture since it’s difficult to tell based on the picture alone. It might just be wide enough to work.

They work as a step.

 

[JcrOffroad]

Here is the first prototype skid plate to get cut. We are replacing the factory intercooler mounts with our own mounts. This allows us to tuck the skid up tighter as well as work with both plastic bumper and mod bumper equipped broncos!

 

[broncoepic]

Here is the first prototype skid plate to get cut. We are replacing the factory intercooler mounts with our own mounts. This allows us to tuck the skid up tighter as well as work with both plastic bumper and mod bumper equipped broncos!

Love the front bumper and the prototype skid plate. I see that the test vehicle has the OEM Bilstein setup. When test fitting, please take into consideration that some of us are running aftermarket adjustable coil over setups with external reservoir. It's difficult to tell from the pictures if fitment will be an issue but it'll be a shame if there isn't enough space for the external resi. A picture of my setup for reference.

 

[TXArea51]

Here is the first prototype skid plate to get cut. We are replacing the factory intercooler mounts with our own mounts. This allows us to tuck the skid up tighter as well as work with both plastic bumper and mod bumper equipped broncos!

Ok I want this also, any idea on progress on the vanguard bumper. Built order or progress of ppl who purchased?

Sponsored