HERITAGE EDITION Bronco Club

[ROSSG]

First addition this weekend was a set of Ford Motorsport Red front and rear tow hooks (Ford Performance part #s M-18954-BR & M-18954-BTHR). Ford description says They say fit all bronco's which is true for the Capable bumper that my Heritage edition has, however you will need to cut off the top middle tab slot from the metal bumper and notch out the plastic cover to clear the extended part of the bracket both are easy modifications (if you have the proper tools). I think the red hooks looks awesome with the Red, White and Blue color combo.

Sponsored

 

[BigFootie]

My bad. I enjoyed the roller-coaster too. Started in my first order at priority 19, which we all know doesn't even get you a cup of coffee. Then had to re-order. That order started with priority 3. Six months later I'm in the build right now. Total wait time from first order to build was a little over 18 months. My dealership sold a ton of Broncos in 2021 and 2022, so I can only assume that's why they're getting more through more often (only based on what my dealer told me).

No worries. I appreciate that you are trying to help. Just so you know, Priorities 3-19 are set by your dealer and really don’t mean much outside your dealers store. For instance, your original 19 could have been scheduled before another dealers 3 depending on allocation, build configuration, commodity constraints and finally when you placed your order.

 

[ROSSG]

Ever since I got my Heritage Edition less than a week ago one thing that bothered me was the pinch weld along the bottom of the rocker because when I looked at how cool this vehicle is, my eyes kept being drawn to the bolts and holes along the bottom of the vehicle, I'm sure it stands out more being a lighter color and because of the steps that came on it. So, I decided to paint the pinch weld Black using some SEM Trim Black.

 

[EvilJim1971]

Ever since I got my Heritage Edition less than a week ago one thing that bothered me was the pinch weld along the bottom of the rocker because when I looked at how cool this vehicle is, my eyes kept being drawn to the bolts and holes along the bottom of the vehicle, I'm sure it stands out more being a lighter color and because of the steps that came on it. So, I decided to paint the pinch weld Black using some SEM Trim Black.

Great idea that more people should do.
I have bed liner I'm using next week when I pull the steps. Pulling them is quick and easy, 4 bolts per side and about 15 minutes.

 

[BigFootie]

Great idea that more people should do.
I have bed liner I'm using next week when I pull the steps. Pulling them is quick and easy, 4 bolts per side and about 15 minutes.

DV8 makes a metal cover as well. But it’s 80.00 not 4.99 rattle can cost.

 

[mdube72]

Ever since I got my Heritage Edition less than a week ago one thing that bothered me was the pinch weld along the bottom of the rocker because when I looked at how cool this vehicle is, my eyes kept being drawn to the bolts and holes along the bottom of the vehicle, I'm sure it stands out more being a lighter color and because of the steps that came on it. So, I decided to paint the pinch weld Black using some SEM Trim Black.

One other quick idea that requires 5 mins is body push pins. I got a whole set with my trim removal kit from Amazon - was like $23 bucks. It came with 10 different sizes of body push pins. Fortunately they fit the 2 different size holes.

 

[EvilJim1971]

DV8 makes a metal cover as well. But it’s 80.00 not 4.99 rattle can cost.

$8.99... it IS bed liner after all.

 

[Brsox]

DV8 makes a metal cover as well. But it’s 80.00 not 4.99 rattle can cost.

I added the DV8 pinch weld covers. They look pretty nice.

 

[7sKnuckledragger]

I just did some chrome center caps. But I custom made the front ones to look like locking hubs.

Looks great

 

[C6ZZGT]

So many color options for the HE trim, every now and again I get the color envy bug, but I gotta say that race red and white, damn such a bold/sharp combo… no regrets.

Race Red for the win,then Black.

Window sticker shows it was a special order. I wonder what happened that the original purchaser didn't pick it up

They are ALL Special order,never available to be ordered for stock.

 

[66RedHotRetro]

Looks like the heritage waterfording capability is over 40" in the Bronco man cave!

 

[Bigred86]

Where did you get your grill?

I got it from a sight called RPM Bronco, they had the cheapest price around and a USA seller.

 

[JamieV]

We took the front and middle sections of the top off yesterday on the new 4dr HE and the front 2 pieces were real tight going into the storage bag. Is this normal? Do you guys have any suggestions?

 

[Brave Man]

One other quick idea that requires 5 mins is body push pins. I got a whole set with my trim removal kit from Amazon - was like $23 bucks. It came with 10 different sizes of body push pins. Fortunately they fit the 2 different size holes.

I just used @JawnyBronco 's 1" black gorilla tape suggestion and it works just fine,
the pinch welds are hidden from view and it was cheap and easy.

 

[Bigred86]

Man this is a nice idea, might have to change my plans of the following...

I did the Ford Acrylic letters from StickerFab and had them make me a custom Race Red emblem overlay so it didn’t say ford on the rear twice lol.

Sponsored