F-150 34 SPLINE REAR END 9.75 ELOCK...

[Valhalla]

I am toying with the idea of Buying a 2014 elocked F150 9.75 rear end to try and make work under my Bronco this is the same ring size As a dana 60. I'd have to check the width (76" being optimal) and I'd have to get 5.13 or 5.38 gears as well as adapt the axles . It is 34 spline. Just thinking need to find one and measue....

Sponsored

 

[Tricky Mike]

A quick google search lists the track width as 67" and the wheel offset as 42-46. That should put it at roughly 70-71" WMS to WMS.

 

[Valhalla]

A quick google search lists the track width as 67" and the wheel offset as 42-46. That should put it at roughly 70-71" WMS to WMS.

yeah, I found conflicting info on that but that as well... tape will tell me better than google...

 

[Tricky Mike]

I wouldn't get your hopes up for 76", even super duty is only about 72".

 

[BigMeatsBronco]

the bolt pattern is different and the suspension connection points are different... a complete new axle for the Raptor Dana 50 can be had for only $2,500 bucks through Ford with the e-locker don't know what spline count they used on it but the axle shafts even with 32 splines are very robust and that's the last thing you'll probably damage on these axles the ringing pinion or the tubes will twist before the axle shaft snap in my opinion plus you can always upgrade the axle shafts to 35 spline by changing the locker

Sponsored