ARB Drawer/Fridge/Compressor on Bronco Raptor

[4x4TruckLEDs.com]

Buddy of mine calls me "Hey I'm stuck at work, can you pickup my Raptor at the dealership"

*drops what i'm doing, runs to the dealer* (no joke, i was busy re-doing the store displays and ran out to get his Raptor)

WHAT A TRUCK! Love this thing!

Anyway we started to do some mods to it of course. First up was the ARB Drawer System, an ARB Twin Compressor and an ARB Zero fridge.

We mounted the ARB Compressor to the side of the drawer system and ran a custom power harness up to the engine bay.

Sponsored

 

[FLSTFI Dave]

Wow that is a really nice setup. Unfortunately the Fridge would take up way to much space for me.

 

[Finbox]

How high can you lift the lid on the fridge before it hits the roof?
I have the exact same fridge it looks like it will be hard to look down into it the way it’s configured

 

[4x4TruckLEDs.com]

How high can you lift the lid on the fridge before it hits the roof?
I have the exact same fridge it looks like it will be hard to look down into it the way it’s configured

A few inches. Enough to get in and out of there. On my own truck I used an articulating mount so I can have complete access to the fridge. You can also put a smaller fridge in. We put the biggest fridge in this supports

 

[Finbox]

“A few inches. Enough to get in and out of there”
so you can’t remove the top basket and access the bottom basket in the fridge ? That’s 40% capacity of the fridge you cannot use.

 

[4x4TruckLEDs.com]

“A few inches. Enough to get in and out of there”
so you can’t remove the top basket and access the bottom basket in the fridge ? That’s 40% capacity of the fridge you cannot use.

If you get a smaller fridge sure. This is a big fridge. The biggest the system supports. Obviously the bigger you go the harder it will be to access. We sell a tilt out system which pivots the Fridge though. OR you can do a smaller fridge and have access.

This customer decided not to have a fridge at all since he has a fridge on his F150 Raptor already.

 

[GotWake]

A few inches. Enough to get in and out of there. On my own truck I used an articulating mount so I can have complete access to the fridge. You can also put a smaller fridge in. We put the biggest fridge in this supports

Do you guys sell this tilting mount now?

Sponsored