ADV Production Modular Hardtop!

[JediMcMuffin]

Well, I hope it all works out. As I said before, sometimes the truth in things will go a lot further than not saying anything.

As for me, I just pulled the trigger on the Armadillo Aluminum top. So I'll start a thread on it when it comes time to put it on.

I may join you there. Hoping they have a prototype of the square back really soon.

Sponsored

 

[Cased]

I still don't understand why any issues with the foam injection process were not discovered/rectified months ago while they were "waiting for the rubber".
To me, "final assembly" means all the panels are complete and just waiting to have the gaskets/glass installed.

I agree with your position and held the same until I read back through that last post …….. I am often wrong but this is taking longer than just some parts and pieces.

It is the only reason I can see for this long of a delay and I really hope they get it/ whatever sorted out soon.

 

[Ninjak]

Did you go with the slant or square back? Gull wing doors?

I went with the slant back and gull-wing doors. I will also be adding the Molle panels, ADD or Armadillos to it. I did the insulation and a orange and black diamond pattern linning.

Not to cloud the ADV, I will start a thread soon on it.

 

[604Bronco]

I went with the slant back and gull-wing doors. I will also be adding the Molle panels, ADD or Armadillos to it. I did the insulation and a orange and black diamond pattern linning.

Not to cloud the ADV, I will start a thread soon on it.

I'm interested in what @Turn Offroad comes out with. I think their top will be pretty awesome, and launching soon by the sound of things.

 

[Ninjak]

I'm interested in what @Turn Offroad comes out with. I think their top will be pretty awesome, and launching soon by the sound of things.

I will be interested on their take as well. As I said for me, it was the Aluminum top, that is still modular, and the setup is what sold me.

 

[adcam]

If ADV doesn’t ship by the time we hit page 100 of this tread, it ain’t happening

 

[604Bronco]

If ADV doesn’t ship by the time we hit page 100 of this tread, it ain’t happening

*spams up the remaining pages*

 

[broncobase1]

Lol I think their reputation is no longer good. Has anyone just popped into their shop for a shake down? If I gave full price and local I’d be there picketing and slandering their name. Don’t even have the balls to be honest.

What? What do you think you would be shaking down? They are offering a full refund to anyone that wants it. I think we just found the troll that didn't spend a dime...

 

[broncobase1]

I still don't understand why any issues with the foam injection process were not discovered/rectified months ago while they were "waiting for the rubber".
To me, "final assembly" means all the panels are complete and just waiting to have the gaskets/glass installed.

You don't understand the complexities of actually building something like this. Its a little more complicated than getting a PhD in [censored] studies at your state university.

 

[604Bronco]

You don't understand the complexities of actually building something like this. Its a little more complicated than getting a PhD in [censored] studies at your state university.

Umm, ExCuSe Me. I've built plenty of LEGO sets in my day, thank you very much.

</s>

 

[Fishwrinkle]

What? What do you think you would be shaking down? They are offering a full refund to anyone that wants it. I think we just found the troll that didn't spend a dime...

Yup I don’t frivolously throw 7k around and wait “patiently “. Now throw some dinner scraps under the bridge.

shake down, also known as grilling them with questions.Glad my 7k is making me money instead of someone else. Sounds like they grabbed all your money for start up. They weren’t up front with that. If it is a kickstarter then sure it’s a gamble, but this is supposed to be a quality stand up company according to all the filtered reviews on their site. Sounds like your butthurt about your 7k, no? Sure, they can refund you, but they still made money on that 7k. Flame on mutha….

 

[Kjbeggs]

You don't understand the complexities of actually building something like this. Its a little more complicated than getting a PhD in [censored] studies at your state university.

I don't understand, that's why I'm asking...

What I know, is ADV told us in December of LAST YEAR that-
-All parts were ready for "final assembly" (Even posting photos of panels stacked up waiting to be put together)
-The FINAL missing pieces were the highly anticipated "Rubber" which was needed for said final assembly.
-On May 4th, 2023, they sent an email that "Rubber has arrived and FINAL assembly has begun".
-And now, there were issues detected with parts that should have been completed months ago.
How were issues with the foam injection process or paint not discovered before now, if those parts were already completed?

I'm not saying I don't believe it, I just don't understand it.


From their December email:
"Your hardtop is entering the final stage of production, which is ASSEMBLY.
At this time, we are waiting on the final piece of the puzzle (rubber).
As soon as that arrives from our supplier, we will finish the last assembly process and contact you to provide a shipping or pickup timeline."

From their May 4th, 2023 email:
"Rubber has arrived and final assembly has BEGUN".

 

[Kjbeggs]

Umm, ExCuSe Me. I've built plenty of LEGO sets in my day, thank you very much.

</s>

I could have built a Lego Hardtop in less than 2 years

 

[Fishwrinkle]

You don't understand the complexities of actually building something like this. Its a little more complicated than getting a PhD in [censored] studies at your state university.

Lol you don’t understand. They should’ve had the design and fab all figured out, but they didn’t. They wanted to be 1st and it fucking bit them in the ass.

I think you and adv need to brush up on business and ethics. Maybe get your phd in those at community college

 

[Dadsquatch]

All I can think of is, while they were waiting around for months on the rubber, they started to notice their tops were delaminating. And that threw a wrench in the whole process. They won’t give any specifics on their QC issue though, so who knows.

Sponsored