2.7L stock boost levels

[ColeTrain84]

when i had the dealer mannequin for a few days i saw 18-19 when i passed someone

Sponsored

 

[JeebusCripes]

I’m only seeing upwards of 3-5 psi on my dash. Doesn’t matter the situation. I hardly ever see psi register. Something has to be wrong with my setup.

 

[Jazer]

Pretty sure it's around 18-19 peak, but Im usually not that focused on the readout if I'm goosing it, lol.

I’m only seeing upwards of 3-5 psi on my dash. Doesn’t matter the situation. I hardly ever see psi register. Something has to be wrong with my setup.

Something is definitely wrong if you are only seeing 3-5 psi.

 

[MileHighCitizen]

I’m only seeing upwards of 3-5 psi on my dash. Doesn’t matter the situation. I hardly ever see psi register. Something has to be wrong with my setup.

You might be stuck in "limp-mode"...If the engine sees something out of spec, but not detrimental, it will cut boost to keep things safe.

My Subaru did this one time when I unplugged the Passenger Airbag (track day) and it sensed a problem with the safety system.

Try disconnecting the battery for a few minutes to clear the OBD codes and let the computer reset. That usually takes care of things. Otherwise you may have a boost leak that will be covered under warranty.

 

[Freedom5]

Pretty sure it's around 18-19 peak, but Im usually not that focused on the readout if I'm goosing it, lol.





Something is definitely wrong if you are only seeing 3-5 psi.

X2 I'm seeing the same

 

[Ground_zero298]

I’m only seeing upwards of 3-5 psi on my dash. Doesn’t matter the situation. I hardly ever see psi register. Something has to be wrong with my setup.

Sounds like the valves not working right. Common issue. Best to swing by the dealer and tell them your truck only makes 3-5 psi at wot. They should be able to track it down from there.

Sponsored